Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Finally decided to add cupholders! We shall see.

Posted
  • Staff

 I finally decided to buy a center console extension to add cupholders to my truck. I've been looking at them for a while but couldn't stomach the $50 price tag. Recently the price has been dropping. I picked this up for $22 from Amazon. I haven't installed it yet. I am concerned about clearance while shifting. (5 speed).

 I'll get pics once installed and report back if there are issues or not.

 

20240203_214956.jpg.5f3c7cf0198f2b3d9067cdbc776fa753.jpg

  • Replies 11
  • Views 1.6k
  • Created
  • Last Reply

Featured Replies

  • Author
  • Staff

 Annnndddd......done.

 Not bad, it didn't snap in like I hoped but for $20 I'm not complaining.  Had to put a few screws in it to hold it tight and adjust the striker for the lid closure.  All in all I like it. 

 After moving through the shift pattern I believe there could be a little interference between the shifter and a soda bottle if it's in the slot closer to the driver.  I'll know next time I drive the truck. Still, for the added convenience, especially on a longer drive where shifting isn't so frequent I think it was worth it.

 

 

20240204_153433.jpg

20240204_153428.jpg

 

 

 

 This is where I put the screws as to not interfere with the lid closing. 

20240204_153446.jpg

20240204_153449.jpg

 Put the old style one in my 94 and loved it. When I bought my 98 ten years ago it was one of the first things that I put in it.

I am curious to hear back after you drive the truck using the cup holder.  I may have to do the same mod. 

 

- John

  • Author
  • Staff

 Well @Tractormanyour in luck. I had to run to the store for smokes so I got to drive it. I even purchased a bottle of root beer to place in it to check for interference.  AND....I even took some pics for you.

 So far the only thing i really noticed is that my right thigh will reast against the extended cupholder. Not a big deal, i can get used to that.  Other than that little thing i like it. I do have to say though, if you try to place tour cell phone in the little slot closest to you, that dont work. The phone gets in the way.

 anyway, heres some pics.

 

2nd gear

 

20240204_220344.jpg.12aace327ded8fbdf9847f24e03193b9.jpg

 

 

 

 

4th gear

 

20240204_220357.jpg

 

 

Reverse

20240204_220406.jpg.9074c5dcf5c7ab27d925ecbdc0238d1e.jpg

 And 2nd with a pop bottle in the tray

 

20240204_223647.jpg

 

4th gear

 

20240204_223654.jpg

 

And reverse

 

20240204_223701.jpg

 

I don't know why the 1st pic flipped upside down. As you can see it really does not get in the way of shifting a manual trans. Possibly if I had my 32oz coffee cup but we shall see. For the $22 spent, it is well worth it so far.

Thanks for the photos and the followup.  I think I'm going to do it

 

Is this the correct cup holder?

 

- John

 

image.png.57a562f6c159b42975e92d09f19e215e.png

I purchased one of these from Amazon a few months ago. I think I paid $28. I like it also. Wish I would have done it sooner. 

  • Author
  • Staff

 I've been thinking about one for a while. They were priced close to $50 for a long time. I didn't feel this piece of plastic was worth that much. Here lately they have been coming down quite a bit, when I saw it for $21 and change I figured I'd give it a try. 

  • 2 weeks later...

@Doubletrouble, I received and  installed my cup holder.  It works well with my 6 spd.  I think the truck has just a little more power now, too.

 

At this point, I didn't use any hardware to fasten the cup holder.  I did notice that the console lid doesn't latch anymore with the added material of the cup holder.  Did you have the same issue? 

 

- John

I was wondering if there was a latch adjustment of some kind.  Thanks for the tip.

 

- John

Archived

This topic is now archived and is closed to further replies.

Did This Forum Post Help You?

Show the author some love by liking their post!

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.