Anybody happens too have a good how to video on installing the draw straw. Ink finally going to poor it on tomorrowand I can find the instructions anywhere.

Would this help?

Wow that was full of typos. Pardon my mistyping, haha.

This is a different draw straw than what I have. I have the draw straw 1 from Vulcan. If I remember correctly I shouldn't have to drill the tank. Thanks tho.

How's this?  For a 12 valve but should be close.

 

http://www.cumminsforum.com/forum/94-98-engine/8792-vulcan-draw-straw-installation.html

I believe I got draw straw 5 the one that replaces in tank fuel pump, works great. The only thing I did different is ran a 1/2 line back to module with some jic fittings and didn't use clip on 3/8 return. That way return is not restricted and won't affect fuel pump pressure. I had to drill out 3/8 fitting from module and that's where I put my 1/2 " return. To bottom of fuel basket. I also threw away screen at bottom of module but kept red rubber valve in place, if I could find that little red valve I would add 2 more on bottom and not drill any holes on sides of module like they want you to.

How's this?  For a 12 valve but should be close.

 

http://www.cumminsforum.com/forum/94-98-engine/8792-vulcan-draw-straw-installation.html

 

That's what I used when I installed my DS-I. Seemed to explain everything pretty well.