Posted March 22, 201510 yr How do you remove the gas pedal on a 2001 2500? There is a plastic retainer, with no screws or tabs to press. I'm ready to use a Sawzall and hack away. Thanks for any help
March 29, 201510 yr Author well, the bracket for the clutch and brake wore out, and the gas pedal is also attached. The steel bar wore into the aluminum bracket so far it made the clutch sit so low, you could not get the tranny into reverse, Only Dodge would design a rotating assembly that will wear out with steel against the cast aluminum? Amazing that instead of a C clip or cotter pin, Dodge has this plastic clip that takes 4 prongs that will not stay so you have to cut one prong to get the accelerator pedal off. So, to remove the gas pedal you have to buy a new plastic clips, $9. <img src="http://i292.photobucket.com/albums/mm16/polymersci/clutch%20bracket_zpsup8yx1np.jpg" border="0" alt=" photo clutch bracket_zpsup8yx1np.jpg"/></a> Edited March 29, 201510 yr by Mopar1973Man Inserted the picture for others to see
March 29, 201510 yr Just future reference, there should be plastic bushings that the pedals ride on. They do wear out over time and if not replaced then you will get the problem of it wearing into the aluminum.
March 29, 201510 yr Good topic and pix. Guess I need to check on mine to see if plastic is wearing. Thanks
How do you remove the gas pedal on a 2001 2500? There is a plastic retainer, with no screws or tabs to press.
I'm ready to use a Sawzall and hack away. Thanks for any help