Search the Community
Showing results for tags 'p0234'.
Found 7 results
-
Had all 5 of these codes pop up at once after changing all of my better connections while trying to figure out my electrical issues. I’ve been dealing with a p0121 off and on for 3-4 months, replaced my APPS, dead pedal came back 3 wks later. Coincidentally my trans (auto) started not going into gear in drive or reverse until I rev up to about 1k rpm’s. I did the BD diesel noise isolator and for a few days it drove perfectly with zero shifting issues or dead pedal. Then started having overboost codes and then the truck randomly died twice. Replaced batteries and redid connections and triple checked the connections, and now I have those 5 codes. Thinking ECM going out due to alternator? Thoughts? And how would I test my ecm to find out? -
i have a 2001 2500 --has no pwer,misses,surges under accelration and blows lots of white smoke . checked codes has po230 and po234- . also when looking at data screen on scan tool has no cmp rpm but tach works fine. can you help me thanksED
-
I have been having issues with my truck towing, seems to have a lack of power. Well for the fun of it I ran the 3x key thing on my truck and read the codes on my SuperChip and this is NOW what it is telling me.PCU 1693ECU 0216 & 0234I just had my injector pump tested at a shop in Green Bay only to pay these guys $700+ to test my injector pump, try to fix my turbo that they tell me my waste gate was stuck. Of course, broken bolts and yada, yada a huge bill and they tell me my stock turbo was cracked.So hence, I buy a new turbo $1200 and install the little wire to my map sensor so I dont get the 0234 code (over boost condition). Obiviously the little wires are not tricking my map sensor for my new turbo.Here is my problem. I dont always get the 0216. Am I getting a glich in my truck or am I really having issues with my injector pump?? Testing showed my pump to be fine. I am calling them tomorrow and they will recheck my injector pump for free especially now that I have the code.That 0216 code will go away again................ I am not sure this is the reasoning for my lack of power while towing?? Truck seems to run fine and you cannot tell any lack of power when not towing anything.Anyone have any thoughts why this code keeps re-appearing but then will disappear for awhile? As always, thanks for the help.
-
Hi guys. I have a couple questions on what is going on with my truck. I noticed I am shifting too early where the RPM's are low and it surges or jerks until the RPM's get higher. It is shifting into 4th gear with OD off at 25mph and it happens also about 45mph where its shifting into high gear and doing the same thing with OD on. Tonight I was doing a couple road tests and I got on it alittle more than usual and when I got home because of how it was acting, I used my scangauge and I had a p0234 code. So I have been doing alittle reading about the wastegate etc which I do not understand and wonder how the code is related to what is going on with my truck. Is it something else with these symptoms??? The only thing I have done different recently is have an Airdog 100 installed and hooked my Quadzilla XZT up a month ago. Any suggestions or answers are appreciated!!
-
Hi new to site and I have a question about the code that came up on my truck it is a 2002. 2500 , 24 valve 5.9 and the code is 1693 what does that mean? I have no idea myself .Thanks for any heip you can give me
-
Hi guys, I ordered one of those bluetooth plug in obd II scanners and tried it out tonight. I finally got it to read and I came up with an error code. I'll include a photo I took of the screen, but it was: P0234 Turbo/Super Charger Overboost Condition. Well, I think I just tripped across a list elsewhere on the site. Can someone confirm that this is the same code, as it isn't labeled the same but the number is the same. http://forum.mopar1973man.com/threads/2569-P0234-Turbo-Boost-Limit-Exceeded Next question: How worried by this should I be and is this telling me of a cascade of problems in front of me? Thanks to all, Jamman
-
Hey Guys, First post! I recently picked up an 02' Ram (in my signature) with the HO 245HP cummins and 6spd, it's got 100hp injectors and a 4" exhaust and no chip/tuner This last weekend, I went for a 250mile drive, and all seemed to be well and got back home sunday morning.Sunday afternoon, I was heading out for a drive and noticed some white smoke at idle, when warming up AND while warm while at idle. While under ACCELERATION/LOAD the truck will now put out more black smoke than usual. The truck was idling fine and nothing seemed out of sorts. Figured I'd pull a code so I quickly pulled over and checked and got P0234. I contacted the folks at BD diesel (they are local-ish and familiar with the truck) and they reccomended I clean the map sensor, but Ive been reading that it may be wastegate related? Anyway, All input is appreciated, i'm just hoping that it's not the VP44. :\ Thanks and take care! -Jeff
