Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Help raptor 100 problems

Hudsondust
 Share

Recommended Posts

dripley

dripley

Posted
Posted
9 hours ago, Hudsondust said:

eah I believe it's still there. I worked at Espey Hardware in Hildebran for 4 years. 

Did Daniel Espey own that hardware store. Went to school with my younger brother, but we all ran around with each other back in my long haired hippie days,

Link to comment
Share on other sites
Evan

Evan

Posted
Posted

I have the same set up Installed it 5 or 6 years ago.  I replaced the intake dodge retrofit kit.  Mines had no issues over the years. I have a mechanical gauge keeping taps on it. Gauge reading pressure at elbo going into vp44. I'm running big line all the way to it.

One of best mods I've done

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...