Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

CPUz

Mopar1973Man

By Mopar1973Man,
in General Conversations

 Share

Recommended Posts

  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Author
  • Owner
Posted

I managed to push the reference clock to 237 MHz and keep it stable under low loads but soon as I put a load on the processor the temp would take off... Time for a bigger cooling fan... 237 x 13.5 = 3,199 MHz (3.1 GHz) From... 200 x 13.5 = 2700 MHz (2.7 GHz) Just like fat injectors in a Cummins... Now the EGT's are just getting too hot.. Time for a bigger turbo and exhaust... :whistle:

Link to comment
Share on other sites
ISX

ISX

Posted
Posted

I'm up! Uh I am gonna have to figure out how they do it myself. Basically you click on the cpuz window to make it active, then hold down alt while you hit printscreen. Then go to paint and paste it and save it as jpeg. Then put it on here.

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...