Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Pulling Eng.

jlwelding
 Share

Recommended Posts

flagmanruss

flagmanruss

Posted
Posted

I had a bad experience with blue RTV. I pulled a repaired engine back out of the boat (I was not a happy camper) because of low oil pressure, dropped the pan expecting to replace the oil pump. I found the oil pickup screen clogged with blue RTV silcone. I guess someone got heavy handed with it. It's been too long, I don't remember any details.I remember liking the rubber neoprene gaskets (BB Chevy) because they could be glued on one side (spray copper sealant) & removed & reinstalled as needed (valve cover gaskets). I don't know if any of this applies to the question at hand.

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...