Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Speaking of Fan Wrenches

jlwelding
 Share

Recommended Posts

ISX

ISX

Posted
Posted

Standing in front of the bumper you would turn it clockwise. Normally that would tighten, but it is left handed, so it would loosen. Clockwise-LoosenCounterclockwise-TightenMost people just spin the fan on and hand tighten it, as the engine kinda works it tighter on its own.

Link to comment
Share on other sites
dually

dually

Posted
Posted

Which way does it turn? If your looking at it from standing in front of bumper. I have done this several times and it does not want to turn.

The first time i removed mine i had to give it all i had to get it off.I am glad i was alone because i pulled so hard i farted accidently.:stuned:
Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...