I'm about to build 2 wiring conversion kits for someone.. I'll have a price in a day or so, but basically it'll be in the amount of parts+shipping+ a tad bit of labor time.. These will be quality, hand-made harnesses, complete.Let me know if you're interested in a conversion harness. Payment will be upfront to fund the parts..

Oh, nevermind. I will IM you.

Are you planning on soldering in a diode on the bottom of the relay, since the diode relay doesn't seem to be available anymore?

  joecool911 said:

Are you planning on soldering in a diode on the bottom of the relay, since the diode relay doesn't seem to be available anymore?

If the system requires it, then yes. Sent from my SPH-L710 using Tapatalk 2

I wish I had remembered that you said you would make me a harness. I ordered one from Stern Thursday a week ago and have heard nothing, have not been charged yet either. Ordered my grandpa one and it arrived in 3 days:shrug:

bummer.. Sent from my SPH-L710 using Tapatalk 2

Ok, guys.. I've tallied up the parts, and factored in some shipping. Looking at around $180 shipped, for these harness conversions. This will be 12-14g wire, fused, relayed, and bracketed. If you want the relays to be diode-equipped, then that'll be a couple more bucks. The diode-optioned relay is to protect EMF back-feed, but should not be an issue, unless you hook jumper cables up backwards. At that point, however, you'll have more to deal with than relays.