door lock solenoids

[GSP7]

Any one fiddle with door lock solenoids

 

My pass side is sticking . Makes a noise wont go up and down with the drives door switch. Once in awhile it works

 

Maybe just needs a shot of penetrating oil

 

Havent felt like pulling the door panel and busting the plastic retainers yet    

 

 

[Mopar1973Man]

I would consider pulling the door panel and looking it over. Might check with local part stores for possible replacements.

[Buzzinhalfdozen]

www.clipsandfasteners.com  I ordered a bunch of christmas trees from here when i re-did my truck, pretty good quality actually.

[CTcummins24V]

Don't pull them out, pry and cut each one otherwise the door will break on the inside. The plastic is way too brittle

[CTcummins24V]

http://www.clipsandfasteners.com/Trim_Panel_Retainers_p/a19213.htm

 

[GSP7]

http://www.clipsandfasteners.com/Trim_Panel_Retainers_p/a19213.htm

 

006.JPG

 

Does the plastic door panel break/ crack where the panel retainers hook to plastic door panel?

 

Do the retainers slide into a grove on the plastic door panels ?

Edited April 4, 2015 by GSP7

[98whitelightnin]

They all slide in from different directions. I go around popping the panel off gently as possible and then put them back in the door panel for reinstall. I need to do the same to mine, drivers door lock works 1 out of 100.

[CTcummins24V]

 

Does the plastic door panel break/ crack where the panel retainers hook to plastic door panel?

 

Do the retainers slide into a grove on the plastic door panels ?

 

Both, exactly