Introductions

Hello everyone!

Stationed at Kings Bay, G and im a Male i like guns, trucks, cars, Hunting/Fishing, computers, and Anime currently play Battle Field 3 if any others are interested in adding me my nick is zapman2000 any questions MSG me

Hi everyone I am currently working in Afghanistan as a contractor with Oshkosh .I will be home in 3 months and may take my 98 ford f-800 service truck ( with the 12 valve cummins) to Texas or N. Dakota to work the gas fields .After a break of course. Your forum has been a great help with diagnostics on the cat c-7 in these up armored vehicles which use the heui fuel pump and similar electronics as my 2001 dodge cummins.I am looking forward to being a member of this stand up group.fldmech1Durango Co

Are there any injection pump rebuilders on here? what is the best way to go on rebuilding or going new on injection pumps I know the less expensive is the rebuild. I don't get on here much because i am working most of the time.

Hi.I am Margus from Estonia, Europe.Maybe somebody knew me from Competitiondiesel forum , I have also account few others ,but mostly for reading.I have few Dodge Ram projects:1. Ram 2500 ' 98 12v , 4x4 QC LB2. Ram 2500 '99 4x4 QC LB , soon to be 12V home made megacab3. Ram 3500 '94 dump truck , RC4. hotrod truck with Cummins 12V I found this site by searching the internet for 2005 Ram SRT-10 parts catalog, looks like I have to read-post before I can even check the download area.:rolleyes:Why I nee SRT-10 parts catalog? I brought set of 2005 SRT-10 front brake calipers to upgrade my brakes, but theywill bolt on to my '01 Dana 60 only without disc.Maybe I can use them in my…

just wanted to say hi. great site, just starting to get into diesel. i have read alot of the threads,so much info to take in. had a few questions i have read about the 2 cycle oil in the fuel, is it ok to add it with other addittives. and my power steering just started to whin when its cold in the morning. its starting to get in to the 20s and teens here. hope its ok to ask here just new to this stuff.

Hey everyone - :cheers:I learned about this site though MoparMan's posts on the Cummins Forum and came over to check it out. I've found lots of information I was looking for, so thank you to those who post helpful info.I'm from Massachusetts (others prefer the term Masshole but we're not all like that ). I have relatives out there in Idaho but not sure what towns they live in now. Not new to diesels (06 and 08 Duramax) but this is my first Cummins and feel I may have bitten off a bit too much. By the time I'm done, I feel as if I'm restoring an antique show car rather than a daily driver lol.My truck has been having an issue with not shifting properly and/or not accel…

Hello all! New forum member here. I hail from the great North of Idaho. Finally had to stop lurking around and get involved! Great wealth of info for me that suit my needs! I'm also on cumminsforum, but it seems many of those guys are into the HP/TQ than just making a stout reliable truck. I'll be posting up on the 2nd gen 24v forum if some of you guys can help me out with a couple things.. Thanks in advance and I hope I can get to know everyone!

I am having an issue with my flip out mirror, driver side, the mirror wobbles, is there some form of adjustment for this? Any help is appreciated!!

Im new here, and new to diesels. I got my cummins about amonth ago. It needs a lift pump and maybe a transmission, but since I am about to leave for Basic I will wait on those things till after I get back.

Just wanted to introduce myself and say hello. Have already posted a question or two and appreciate the help received from this forum. I am fairly new to the Diesel world but I have been tinkering with cars, motorcycles and trucks since I was old enough to hold a wrench.So from the state with great bourbon, fast horses and beautiful women a great big "HOWDY" goes out to everybody!!

hey nice looking site, stopping in from Ontario Canada.

Hello, everyone! I ve been a lurker here for a while and figured i have some good input to share and input to learn from by others. I bought my 2001 cummins 3 years ago, since then i have done alot of work to it including vp44 failure (no hot start) that happened right when i started researching failure points on the truck. I spent 6 hours replacing it, the lift pump and installed an edge juice. It now runs the raptor 150 lift pump, and i have had zero problems since. This site also started me on using 2 stroke oil for lube and it actually made a bit of difference. I have been wrenching as a hobby/desire to save money by doing it myself since i was 5 or so…

Hi guys im Anthony from southern Cal. LA area so i dont have to deal with cold starts I got my truck a couple months back from the original owner. Only had 159k miles. My previous truck was a 92 F250 7.5L gas. What a world of a difference. I love having a Cummins! Im slowly learning and cant wait to learn more. Great to be here.

Hi everyone. My name is Russ, I'm in central Pennsylvania. I currently do not have a cummins, or any truck for that matter. But I am in the market for a new truck. I have always liked the sound, performance, mileage, and durability of diesel trucks. Right now I just doing research to see what I want, I'm thinking 99-02 2500 4x4 with manual trans.

First post- newbie here. What an incredible site! Looking forward to learning about the site and my truck. Hvae been lurking for a while and figured this was the best site I have found.Jeff,Garland, Texas2002 Dodge Ram 2500, 6 speed HO. No mods

Hello group, My name is Sean and I just joined here yesterday. I'm currently a CM2 in the Navy stationed in MA. I drive a 02 dodge 2500 that I bought used in 04. I look forward to participating on this site.

I was looking around the net and hit on Mopar1973man. I have read your posts on other forums so I decided to sign up. I am not much of a Dodge fan but I do like Cummins.

Hello my name is Cory. I live by Madison, Wi.Picked up a 99 cummins project truck a few weeks ago. Has a cracked #53 block. Trying to sort out what I have and figure this thing out. I know foxbody mustangs very well. Have'nt done much with big trucks. Found this site over on cummins forum. Looks like I will learn a ton on here. You have done a great job mopar1973man. I will try not ask alot of questions. Although I cant promise that. Lol.

northbound on US 95 through New Meadows ID when I lost the serpentine belt ('93 F250 7.3L) right in front of this here webmaster's doorstep. I wandered up to his front door a frustrated and slightly broken man and was made welcome. Mike (mopar1973man) opened his home and his garage to my troubles and gave me valuable assistance. Unfortunately, a simple garage on the side of the highway far from any OEM distributor or machine shop could solve my troubles in a timely manner (sheared bolt on the tensioner pulley) and I had to phone in a couple favors to haul me and my wreck away. On the bright side I have my own semi truck ('04 IHC 9400i Cummins ISX Meritor 10 speed Rockwell…