2nd Generation Dodge 24 Valve Powertrain

so i wanna turn on the cold weather high idle on my truck and have access to a drb3 with all the chrysler software. when i go to turn it on it refuses to connect with the ecm, then i read somewhere it wants you to have the latest update before it'll let you make those changes. so far the drb3 has only been used as a scantool so no one has any idea how to reflash it. from my understanding i need a memory card with the update software on it, but not sure where or how to get it. i also have numerous cds with the title ITIL/ISIS from chrysler but i think these just updates for the drb3 itself and don't contain updates for vehicle ecms. however correct me if i'm wrong, loo…

Hi there. Hope everyone is well. I recently started getting some chirping in the cab and dismissed it as something being loose. However, seems it only occurs when I dump the clutch or quickly increase demand from the engine. Does this sound like it could be the t.o.b. starting to fail. Thanks for the time.

I am ordering a vp44 and was going to replace the stock replacement fuel pump while i am ordering which airdog do yall recommend. i am going to stay stock might install a smarty later on down the road. any suggestion.

Hello, all. Was out enjoying the day with the kids after work. Drove to the park. Went to go home truck started fine, drove away half way home truck died. Lost power, dead pedal and pulled off the road. I had 15-16 pound of fuel pressure, called my dad he brought out my snap on modus and recieved the gift of the P-1688 code. I tried to restart the truck after a min or two after pulled over. it wanted to start but didn't. I could here the airdog pump running when the key was cycled. Truck had been running fine. When i was home I varied fuel at the inlet of the VP. tried cracking injectors 1,3,5. but nothing. I trust the knowledge of Mike and the others on here the most. No…

just bought my truck about 2 weeks ago and today when i started it ,i got out on the road and it would not run over 1200 rpm i had to pull over and turn the truck off and then start it back up then it went on no problem the rest of the day. The codes i pulled on truck was PO122 and P1693 on the PCU and P0216 and P1693 on the ECU. Could somebody help on what is the problem. Thanks

Just wondering if anyone here has tryed the lucas diesel fuel additive I have tryed it out on my last few fill ups and it has seemed to help my mpg by about 2 or so. I know alot of complaints about additives where they have solvents and such. This lucas pours out like a syrup almost. I was just kind of wondering what the advantages 2cycle oil would have over this stuff. Accept for the fact that lucas is about 10$ a bottle.

I'm usually pretty good at using search or google to find stuff but I can't find this.People keep referring to an article/post from Michael concerning a LP relay mod but I can't find it anywhere.Does anyone have a link or know where it is?Thank you in advance!

I am working on my brothers 1999 Dodge doollie, 3500 extended cab with the 24 valve Cummins Turbo Diesel. When you turn the headlights on it kills the engine. The problem is sporadic and will come and go. I pull the ASD relay and the engine will run with the headlights on, after a while, maybe five minutes it will kill the engine, when you turn the headlights back on. I have replaced both the ASD and Fuel pump relays. I also have .5 amp discharge from the battery, which I tried to track down by pulling circuit fuses, one at a time. I did not find it. I believe I have a bad ground somewhere but can't find the link between killing the fuel pump (engine dies) and the headlig…

My charging guage is indicating that it's not charging correctly (leaning left). I messed with some wiring to the alternator yesterday and today it worked fine coming to work. Just took a short drive and it's leaning toward the left again. I'll take a closer look at the wires/plug again but my question is what other components are involved in the charging system on these trucks? The batteries are new and I had the alternator checked in November (two days before my wreck) and it checked good then.

I cant seem to remember if my dodge 47re is loc up or non loc up torque convertor? Can anyone help!

Ok guys, bout to pull the trigger on an Airdog 100 as soon as my tax return comes in but had a few questions. First off, my Isspro ev2 fuel pressure gauge seems to be acting funny. When I get in and crank the truck in the mornings when engine is colder the gauge will go to zero for a minute and then pop up to about 10-12 at idle which is where it normally is. No rhyme or reason though I can be driving and it will drop to zero and sometimes stay there or pop back up. My set up on the gauge is I tapped into the test port of the vp44 with a banjo/snubber bolt to a grease gun hose then to my sending unit. I used teflon tape on everything but the banjo bolt to the vp44. I…

Throwing this out there.... could you remove the dodge ecm and wire harness and replace it with a regular isb ecm & wire harness? ive been looking at diagrams and the dodge/isb only has 1 50 pin connector while the non dodge ecm has 2 50 pin connectors, and on that 2nd connector could you do more with (extra features that dodge didnt seem to want us to have which bother me). I've just been thinking outside the box lately, traveling the path less taken.I need to get the Cummins Inline 5 or 6 at some point to, see what I can do with the Insite program (yes i have all the levels of licensing and the licensing for password removal & oem password removal), Also I have …

I am looking at upgrading my 99. I have gauges(egt, fuel and boost), boost fooler and a boost elbow. I am thinking that one of the next things to install are injectors. I know everyone likes the RV275's, but looking around I am wondering if 75 hp injectors are also a good option. I do not tow heavy loads a lot, but there are times that I do load the truck down and would like to have some extra umph. I know that I will also need to upgrade my fuel pump as I still have a stock type in the tank, but for now I am just looking at different options. The truck has around 350,000 miles thus far and runs down the road without missing a tick. Thanks for any input.

So, I finally got my truck back from the shop today. Even though I saved a bunch of money by using my son-in-law's dad's shop, I have some issues. I'll start with a question about the transmission lines that go to the heat exchanger. The guys at the shop crossed the lines and now they are touching. My question is whether it's ok to use anti-chafe tape or do I need to re-route them or is this not an issue and I should just ignore it? ThanksAlso, I have a...vibration or shake that is different than the old engine. It's worse in neutral than in gear. Other than that it runs great. Any input is welcomed. Thanks

I am about to have the Airdog 100 installed and have a quick and easy questions. Someone said to put the bigger spring in for 17psi versus the regular 15psi and i twas included in his parts for the AD. There is one spring in the bag with hardware, is the 15psi spring in already and you have to change it with this one or it's an extra and I need to get it here before I do the AD install? Just curious, wasn't positive. Thanks!

ive been seeing on here alot of people running a BHAF. what exactly is this, what are the advantages of running one? sorry if this is a dumb question but i havent ever heard of this

So, I bought my truck a few months ago. Nice condition, well taken care of but was completely stock. I talked to previous owner and he said he had transmission built with heavy duty parts for towing and at the same time he went through and replace ring and pinion, seals, bearings in rear end at same time. I am and have done some upgrades but just want a good maintained reliable truck. Sorry I am going on and on but getting back to having rear end redone. When I changed the rear differential speed sensor today I pulled old one out and there were metal filings on the piece that sits inside the rear end. I thought maybe from before it was redone. So I put new one in …

I have found the LF16035 @ truckhelp.com for $9.10 each plus shipping. Does anyone know where to get them cheaper? I have found them on line from $9.10 to $15.00 plus. I can get a MOPAR filter for $13.49 out the door at a local parts store. What is the conventional wisdom on using /not using the MOPAR filter?

Last question I have for you guys to help me with thats probably pretty simple to answer. Obviously because I have a 99 I cant read codes with using the key switch trick. I currently have a quadzilla xzt+ chip. I am looking for something to give alittle boost that is fairly easy to hook up that will read codes. I can't make a decision on spending the money on an edge juice with attitude because of price and I don't think I would use more than 60hp, smarty, or scan gauge. Everyone has something different and I figured you guys could give me a suggestion on what I should go with for my needs. Thank you!

Hi there guys. A couple days ago I was driving down the highway and the ABS and brake light came on. Wasn't sure if it was anything big so I pulled over and shut truck off, restarted and lights were off. I asked someone and they said it was common and no big deal. Now, last night both came on, won't go off and now my speedometer wasnt working at low speeds in town but then when I would get to 45mph or so it would jump up and when I would slow down, it would drop to zero again. Is this an issue with the batteries or something bigger or are they separate problems? I have the 99 and no code reader so just trying to figure it out! I did have brakes changed about a mont…