General Conversations

How do I get my information on the bottom of my thread when I post something. New to site as for as posting.

so, yeah. I have a Flip video camera, that records in HD. Problem is, a 5 minute video can be like a Gig is size, easily.What are you guys using to crop/trim your videos, and is it 'free' or purchased? I tried using Handbrake, but it killed the video output; looked like total ___ when it was done. It was also choppy as can be.Also, anything that can 'rotate' a video? If you film with it in 'landscape mode' (holding it sideways), the video is on it's side during playback on the computer..

Last night i got a call from a friend down the road from me asking if I would look into the error codes in a vehicle for him. So We wrote them down and I reset the codes and took a ride in the car to see if the codes return. He got on the throttle and had that little car singin' at 85 MPH and he turned to me and said I got to back out of it because of deer I seen earlier. Well wasn't much more than 1/4 mile later we saw a little car pull off the side of the road with the front end crushed. Drove on slowly and sure enough a animal had be hit. Just a little bit farther and a mess load of sheriff and ambulance was working with another car. Needless to say what happen was a e…

I finally got my first snow here in Idaho... Its been dry all this time. Even the ski resorts are hurting with only 25" at the summit 7K feet...

Got a screw in the tire today.... All to the list of stuff to do tomorrow. Sent from my iPhone

My HP inkjet D2460 just broke down so i will be needing a replacement. My printer lasted for years and I would something that could also be the same. Basically it would be for printing pdf files,e book and documents.. color printing will be occasional. i want it to have a low running cost,refills would be great since its cheaper and one that will not occupy a lot of space. i prefer a brand which i could refilll its printer ink cartridges..[TABLE=width: 203] [TR] [TD=class: xl70, width: 203][/TD] [/TR] [/TABLE] printer ink cartridges

Anyone home ?

the fire piston? http://en.wikipedia.org/wiki/Fire_piston I'm thinking about this whole thing and wondering how I can make a larger version and using a hatchet instead of your hand to ignite larger fuels. It fascinates me. How much compression do I need? How fast does it need to be? How hot does the temps get? There is a science behind this that I'm dying to know!

Well gang my PC is getting it beating tonight. I been burning backups and such and started noticing that the DVD are like a near un-burnt state in the middle ring of the disk like the lazer is getting weak and just not burning the disk strong any longer. So now next time I'm headed to Boise, ID I'm going to stop by my old computer part dealer and see about getting a new DVD-RW drive to replace this one... Well I got to admit I got 5 years from it before it final got flakey about burning...

Another mans junk is another mans treasure! http://www.energeticforum.com/renewable-energy/7040-how-turn-plastic-waste-into-diesel-fuel-cheaply.html http://www.kxly.com/news/30192050/detail.html Muahahaa!

I'm still laughing my arse off about a kid over at CF.com that is asking to put a smoke switch on his Cummins at the same time he's going to install a P-pump conversion... http://www.cumminsforum.com/forum/98-5-02-performance-parts-discussion/460623-smoke-switch-24v.html Someone replied with...

Hey guys, I noticed that there is no place for a biodiesel runner. Does anyone here run biodiesel or have thoughts on it? When I can catch up on money and get the time to do it, I plan on getting myself setup with an operation to refine it.Just wondering if anyone else is interested..

what ever happined too the chat room?

Check this out guys and gals... http://forum.mopar1973man.com/threads/5062-Profile-usage?p=45835#post45835

Here is another good video on how a turbo functions...

http://www.idahoturbodiesels.com/vb/forumdisplay.php?f=29 we have a lot of good times coming up. next event is the january dinner meet. dyno day coming up as well as some camp trips, 4WD trips, and shooting events. also a BOMB/wrench event in the works. the idaho club has been active for 11 years getting together and having good times amongst friends throughout the state. hope to visit with you guys in person soon, and here and at www.idahoturbodiesels.com . . --- Update to the previous post... http://www.idahoturbodiesels.com/vb/showthread.php?t=8874 the idaho dinner meet is coming up jan 18. hope to se…

I found this little video and might be educational to some of you...

I just had to share this as its absolutely unreal. For those that don't have 4 minutes, at least skip every minute to the end lol. Of course, only a dodge could pull this off

http://www.dmarge.com/2011/12/pickup-trucks-libyan-liberation.html

Here is a weird find... I was digging around the site logs and looking at different spider that are crawling the site and found this strange little forum search engine that might prove to be useful... Take a peek and give it a test run... www.omgili.com