Jump to content
View in the app

A better way to browse. Learn more.

Mopar1973Man.Com LLC

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Posted

What's the best place to get some exhaust to make my stock 3 inch into straight pipe , or if I was going to buy a straight pipe where should I purchase 

 

  • Replies 22
  • Views 3.4k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

Posted Images

Featured Replies

If I remember right, the reason you wont see pyrometer thermocouples pre-turbo is because of potential failure of the thermocouple and being before the turbo.

Nonetheless, pre-turbo the highest "sustained" SAFE temperature is 1250*.  Common rule of thumb for most diesels.  Yes there is an approximate 300* difference when the thermocouple is post-turbo but the level of accuracy in that reading will be determined by location of the thermocouple.  So instead of 950* being the alternative temperature, its suggested not to run post-turbo EGT's higher than 900*. :thumbup2:

Not laid up for several weeks yet but I'll see what I can find on that page about probe placement when I end up there.  I have couple other sources I can talk to since they are relatives.  One just retired from PACCAR but worked many years for Cummins and was shop foreman for a few years at Cummins/Swan Island, PDX.   Another one works for Freightliner and was shop foremen for a few years @ McCoy Freightliner/PDX.  Maybe can get some good input from those fellas.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.