Hey guys, When I got my truck I didn't get any remote for the door locks. Yes, it is supposed to have a couple. My question is besides a dealership os there anywhere else I can get one programmed? I know a dealership will have the DRB III to get into the computer, but who else?

As far as I know, the dealer is the only option. There might be some 3rd party stuff out there but I've not seen it yet.

That's what I was thinking, unless a good locksmith could do it. Anyone have any idea how expensive it could be?

I stopped at a Dodge dealer in Uvalde, Tx. to see what they would charge for getting a remote working. They said $60 to program. I thought, well, that's kinda high in my mind, but doable. I asked about a remote since I didn't have one and how much they were. HOLY CRAP!! They wanted $130 plus $10.73 tax along with the $60!!! That ONE remote would have been $200.73!!! I just ordered two of them from Amazon for under $40. That way IF I find a dealer and have a bit of time I might be able to get them to program one of them (or both).

Just as a follow up, I got TWO remotes off Amazon for under $40. I am going to call a locksmith tomorrow morning to see if he can and how much it would be.

Well, I wound up at a dealer to program the new remotes. The remotes wouldn't work. Turns out the dealership gave me the wrong part number.  The only good thing to come out of today was I did get the PIN code so now I can have an automotive locksmith program the new remotes when they get here. What a PITA........

Sometimes your windshield, sometimes the bug. Have a nice day Mr. Moth...

I seem to spend more time as the bug than anything else.........

Off to a dealer again with new remotes. HOPEFULLY these will work.......

Welp, got back from the dealer. One of the aftermarket remotes works and the other wouldn't program. The tech even tried another battery. HOWEVER, I popped the remote apart and found the battery was in upside down. I got back to my trailer and found instructions of how to program another remote, but can't seem to get the truck into the program mode. I would hold the unlock button for 10 seconds, then press the panic button and release both at the same time like the instructions said to do. I tried many times and gave up. Anybody else have any ideas?

And splat goes the bug, again. I wish you luck and wish I could help.

I'm getting tired of seeing the truck from outside the windshield............

This is getting ridiculous. I emailed the supplier of the remotes for assistance and the first TWO emails back from them was to get my full name and zip code? WTF has that got to do with these remotes? All I want is to get two remotes working. The remotes really don't give a rip who is pushing the buttons or where it physically is........

If get into requesting information from a particular company while trying to solve a problem, I always get their full name. It seems to make them sit up straight, listen and put some effort into helping me.

Asking for your information might be a security thing concerning vehicle security, just so they have a record of the phone call.

Maybe it would take a phone call, I don't know. I just can't seem to get the truck and remote into the program mode so I can try to get the other remote functioning.

Guess what?!?! I got the other remote programmed! I found a site with a variation of what I was supposed to do. Turn the key to the run position, but don't start it. Instead of holding the unlock for 10 seconds, the instructions said hold it between 4 and 10 seconds then push the panic button for one second and release both at the same time. Next push both the lock and unlock buttons at the same time and release. It takes a coupleof secondsto hear the chime signaling that step was recognized. After that push any button on the remotes, wait for the chime and you are done. 

Take that Mr. bug for I am the windshield again.

Good to hear Tom.

Apologies, as I know this post is a bit old.  I bought two fobs off of ebay or amazon.  Then had a locksmith program and cut the keys for about $40-60. He did program them and not just clone them.  I did have one original, and the dealership wanted an astromical amount for the programmed and cut key/fob.

On 5/7/2018 at 1:25 PM, MnTom said:

Guess what?!?! I got the other remote programmed! I found a site with a variation of what I was supposed to do. Turn the key to the run position, but don't start it. Instead of holding the unlock for 10 seconds, the instructions said hold it between 4 and 10 seconds then push the panic button for one second and release both at the same time. Next push both the lock and unlock buttons at the same time and release. It takes a coupleof secondsto hear the chime signaling that step was recognized. After that push any button on the remotes, wait for the chime and you are done. 

I have read repeatedly that you HAD to have two working, programmed fobs to program another fob.  Fantastic that it worked!