Just taking a little break from my TC Lock problem - which is still under study/investigation. 

 

While digging around, 

I found this black wire beneath the ABS module.

 

It comes out of the same wiring harness as the wires/connector for the ABS.  

I rings out to chassis ground.  I assume a bolt/screw goes thru the eye, but I see no place

within black wires reach for it to go.

Does anyone know where it's home is please. 

I bought truck second hand and it looks like the LEFT Fender might have been replaced.

 

Thanks.

Leaky

 

 

 

I think a lot of us have the same wire not connected.  No one has ever figured out where it goes and why, that I know of.

 

don't worry about it, or ground it if it pleases you.

 

HTH
 

Hag

The only all black wire on the ABS diagram I see is G100, and it does not appear to land in that area it's looks to be more up front on the left side.

 

There are 3 other grounds on the ABS sheet G101, G107, G200, they all have color tracers on the wire. 

 

Is there a tracer on the wire?

 

Here are the locations of those grounds.

 

The manual is really great for all the info they provide on the wiring and harnesses.

 

G100, G101

 

G107

 

G200

 

Thanks. I went back out and verified there is no trace on the wire.  Just a black wire.

I took a couple more pics also. There are 2 branches coming off the Loom, 1 going to LF ABS Sensor, and one going

to the Proportioning Valve. And the mysterious Black Wire. 

On my '01 that wire is bolted/grounded to the ABS bracket.

 

 

https://www.turbodieselregister.com/posts/2418061/

 

Thanks. Leaky