Posted June 11, 20205 yr Okay I picked up some 7/12 injectors with large feed body’s and vco nozzles and was wondering what I need to set my can bus fueling to get these to fuel right it’s fueling way to hard Edited June 11, 20205 yr by Project_blackgold24v
June 11, 20205 yr Have you read through the Quadzilla tuning procedure? Are you running with the wiretap on?
June 11, 20205 yr Owner Start at about 80% and work your way up. Also I would have to know several other factors. Tires size Axle ratio Transmission Injector pop pressure Turbo
June 11, 20205 yr Author Yeah I have ran it on wire tap and with out and still fueling hard it’s drivable on 0 bit of you go to get in it it covers the hole road behind me and I made a tune with it wire tap where it don’t come on to about 15 psi of boost and start the canbus fueling at like 80
June 11, 20205 yr Owner 11 minutes ago, Mopar1973Man said: Also I would have to know several other factors. Tires size Axle ratio Transmission Injector pop pressure Turbo 1 minute ago, Project_blackgold24v said: Yeah I have ran it on wire tap and with out and still fueling hard it’s drivable on 0 bit of you go to get in it it covers the hole road behind me and I made a tune with it wire tap where it don’t come on to about 15 psi of boost and start the canbus fueling at like 80 Need this information to help you...
June 11, 20205 yr 2 hours ago, Project_blackgold24v said: Yeah I have ran it on wire tap and with out and still fueling hard it’s drivable on 0 bit of you go to get in it it covers the hole road behind me and I made a tune with it wire tap where it don’t come on to about 15 psi of boost and start the canbus fueling at like 80 Did you follow the directions in section 2 for how to get started? It lays out how to find your starting %
June 11, 20205 yr Author Injectors are 3000 pop and 35 inch tire has a Borg364.5/73/14cm and has a billet duel disc converter stage 2 clutches had shafts it’s a sport I think the gear are 3.54 and
June 11, 20205 yr Owner Oh my this is going be impossible to clean up. 7 hours ago, Project_blackgold24v said: 35 inch tire Tires being 35 inch tires your final ratio is too low at 3.21:1. This is going to require lots of fuel to get turning. Optimal you would need 4.10 gear to fix this. Like myself I swapped out to 30" tires this raise the final ratio to 3.69:1, more torque to the ground, extremely low EGT's, no smoke at all. 650*F at 80 MPH at 2,450 RPM in 5th gear. What size injectors? (Found it ( 7x 0.012) injectors in the first post) 7 hours ago, Project_blackgold24v said: Injectors are 3000 pop 3,000 pop is too low. Stock starts at 4,500 PSI or 310 bar. I'm even using 320 bar (4,641 PSI). 7 hours ago, Project_blackgold24v said: Borg364.5/73/14cm Turbo in my opinion is too big. Spools too late. Hence your smoke, you can't spool that big turbo quick enough quick enough. Optimally 62/68/12 will support 150 HP injectors up to 200 HP injectors. I'm even running HX35/40 hybrid (60/60/12) with 150 HP (7 x 0.010) @ 320 bar which spools extremely fast and giving me just at 47 to 49 PSI of boost. Still think the turbo is too big. Edited June 11, 20205 yr by Mopar1973Man
Okay I picked up some 7/12 injectors with large feed body’s and vco nozzles and was wondering what I need to set my can bus fueling to get these to fuel right it’s fueling way to hard
Edited by Project_blackgold24v