Jump to content
Posted

Parked my at the job today. Get back in it about 15 minutes later and the flasher is clicking just like the turn signal or hazard lights were on but they're not. Sitting in her now and it is still clicking with nothing activated. I guess power getting to the flasher some how but to the lights unless the turn signal or hazard button are engaged. Any one had this happen?

  • Replies 5
  • Views 1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Pull fuse #4 in the PDC. If the clicking stops then you may have a bad relay with an internal short to ground.

Featured Replies

  • Staff

Pull fuse #4 in the PDC. If the clicking stops then you may have a bad relay with an internal short to ground.

  • Author

I got back to the motel and the clicking had stopped. But it was clicking when I left. I was going to buy a new one on the way home but paased no parts store on the way home. I will find tomorrow and pick up a spare if nothing else since I was thinking it was bad myself. Thanks for the info and I will try it if it starts clicking again.

 

Funny thing is the wife always gives me hades if I leave the signal on after a lane change or turn that does not quite turn it off. Cant believe I even heard it clicking. 

  • Author
46 minutes ago, Mopar1973Man said:

Maybe a bad multifunction switch

 

Hope not. This one is about 3 years old. The flasher is working normal again today. 

  • Staff

Stuff like that drives me nuts because when you get older and you turn off the blinkers you still see them flashing for awhile. :lol3:

 

Ahh a little humor with the first cup this morning....:thumb1:

Edited by JAG1