Posted December 29, 201311 yr My truck will pull start but wont start using starter. The truck turns over fine just wont start unless u pull it. I can hear the lift pump running
December 29, 201311 yr You sure it is turning over fast enough? That sounds more like it is cranking slow than anything else. Do you have a fuel pressure gauge on your truck? If so what does it read while cranking?
December 29, 201311 yr What's the batteries like? Are cables and connections good? I agree with MnTom.
December 30, 201311 yr Ehmm.. check the starter? If your starter is not cranking then its either going out or the batteries are dying. It should be pretty simple.
December 30, 201311 yr Get the batteries load tested, check all your cable connections to the starter, all grounds, if everything is in good condition its probably time to pull the starter.
December 30, 201311 yr Owner Batteries need to be load tested. Starter needs to be pulled and check for contact wear and brush wear. Need to do a voltage drop test on the battery cables. Then double check the fuel system isn't losing prime and filling with air.
December 31, 201311 yr He said it cranks over fine. Is there a chance some wire somewhere is corroded and the starter pulls the voltage down enough to keep whatever from turning on? Hence why pull starting it fixes the issue since the starter isn't pulling the voltage down.
My truck will pull start but wont start using starter. The truck turns over fine just wont start unless u pull it. I can hear the lift pump running