leety

Good idea!!! Based on the car fax, where it was purchased and serviced, I believe the car was inland/east of San Diego for all of its life except the last year, it was in Arizona. Now it's back in Southern California where it belongs LOL The up side is cars just don't rust here. I have an '02 Sequoia I purchased new and not one bit of rust or corrosion on it.

Awesome thank you! Sounds like in in for an adventure :-) I found this it's for 1999 so I'm guessing 1998.5 to 2002.5 are all the same yes?

I can't get the code to come up with my ODBII reader. I also tried my local auto parts ODBII reader and no codes. I have a check engine light and the code comes up with the turn the key 3 times trick only. Very odd. Can't clear the codes with my ODBII reader becuase it can't get the codes to come up. I noticed tonight that the terminal connectors to the battery are in nice mess. I'm going to install the military grade terminals this week. I suspect that might have something to do with it.

cleat?

Hi I recently purchased a 2001 3500 - 4x4 - 6 speed manual - quad cab. It has just under 98k miles on it. It has an edge tuner, banks 4" exhaust, Banks exhaust brake, pyrometer gauge and turbo boost gauge. It had a quite a bit of differed maintenance and a few needed repairs so I'm getting that all caught up first. The check engine light came on 2 weeks ago and I pulled P1693 + P1690. The truck was running but seemed a but sluggish at the time. I changed the fuel filter, which was really grungy. I cleared the codes and measured the fuel pressure which came in at just under 15 psi. I also changed the air filter. I drove it around for a bit and it seemed fine. This week I had the oil changed, the cooling system flushed and the brake fluid changed. All other fluids were already changed. I ran some errands today and the check engine light came on again. This time I got a P1693 code but could not pull any other codes with my ODBII reader. I tried a reader at my local auto parts shop, nothing came up with that reader either. The truck seems to be running fine, but I haven't had it that long so I'm not 100% sure what normal is yet. Any suggestions would be awesome!