Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Laggy, smokey, horrible fuel mileage.


Recommended Posts

I know.

On the other hand .... I've seen things with these trucks you wouldn't believe in terms of engines holding up.  Over 2000 egt for sustained runs ......
Unless he towed a 10% grade a WOT ....... seriously doubt he stuffed his engine with a superchips and 7x.010 ........ 

Not disagreeing - just taking the other side on not having him jump a cliff :) 

  • Like 1
Link to comment
Share on other sites

  • Owner
Quote

I've seen things with these trucks you wouldn't believe in terms of engines holding up.  Over 2000 egt for sustained runs ......

That's a heavily modified racing engine. Stock engine would never hold up to that.

Like said before get gauges. Protect your investment. If you want to verify your engine health just do a compression check and do a pop testing of the injectors while their out.

Edited by Mopar1973Man
Link to comment
Share on other sites

 

3 hours ago, Mopar1973Man said:

That's a heavily modified racing engine. Stock engine would never hold up to that.

Like said before get gauges. Protect your investment. If you want to verify your engine health just do a compression check and do a pop testing of the injectors while their out.

 I know a guy that ran 1800* sustained for a couple minutes....  Says EGT's are actually ***'s (Turbo Intake Temps) and don't correlate well with Actual cylinder temps.  For instance, we all know raising your timing lowers EGT's.  Well, it raises cylinder temps.  I'm not saying everyone can go out and run 1800* all day long, but EGT's aren't a magic number. 

Edited by Cowboy
Link to comment
Share on other sites

Looks like you are hearing all the bad that can happen, but start simple. Pressure test the intake for leaks. Clean air filter. While you are in there with compressed air shoot 20 psi or so in the waste gate  and  be sure it is not stuck open. If you have no luck with that then move on the more compicated things

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...