I am down to my last bottle of Valvoline Semi-Synthetic power steering fluid. Can't seem to find anymore. I draw out the power steering fluid in the pump reservoir at each oil change and refill with new just to keep the PS fluid fairly fresh. What are you guys using? Thanks.

I use amsoil ATF, but I think the 2nd gens use an steering specific fluid..

I have heard good things about this.

http://www.amsoil.com/storefront/psf.aspx

I use amsoil ATF, but I think the 2nd gens use an steering specific fluid.. I have heard good things about this. http://www.dieselmanor.com/diy/CMS3-gauge/G3image5.htm

I think you may have posted the wrong link. This is about installing a boost bolt in the intake manifold.

Fixed! Guess I didn't hit CTRL-C hard enough.

I have been using Amsoil synthetic power steering fluid in my 2000 for the past few months. So far so good. Chris

I am down to my last bottle of Valvoline Semi-Synthetic power steering fluid. Can't seem to find anymore. I draw out the power steering fluid in the pump reservoir at each oil change and refill with new just to keep the PS fluid fairly fresh. What are you guys using? Thanks.

Black sheep in the crowd... Walmart Super Tech Power Steering fluid... I change every 30K miles just like here in the write up... http://mopar.mopar1973man.com/cummins/3rdgen/ps-flush/ps-flush.htm

I thought i read somewhere that Dodge now say's to use ATF+4 @ 100% but not to mix w/P/S Fluid.

Yea... The the newer trucks like the 3rd gens... The 2nd Gens are still power steering fluid...

I just changed mine, it calls for Dextrom II or III, I filled it up with Amsoil ATF

Nice can of spam FLMAN! I just changed the the fliud in my transfer case with Amsoil ATF....that is some stinky smelling stuff! I guess if it stinks that bad, its gotta work wonders!

I just changed mine, it calls for Dextrom II or III, I filled it up with Amsoil ATF