Jump to content
Mopar1973Man.Com LLC
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Errant Black Wire


Recommended Posts

Just taking a little break from my TC Lock problem - which is still under study/investigation. 

 

While digging around, 

I found this black wire beneath the ABS module.

 

It comes out of the same wiring harness as the wires/connector for the ABS.  

I rings out to chassis ground.  I assume a bolt/screw goes thru the eye, but I see no place

within black wires reach for it to go.

Does anyone know where it's home is please. 

I bought truck second hand and it looks like the LEFT Fender might have been replaced.

 

Thanks.

Leaky

 

 

 

IMG_5370.JPG

IMG_5371.JPG

Link to comment
Share on other sites

The only all black wire on the ABS diagram I see is G100, and it does not appear to land in that area it's looks to be more up front on the left side.

 

There are 3 other grounds on the ABS sheet G101, G107, G200, they all have color tracers on the wire. 

 

Is there a tracer on the wire?

 

Here are the locations of those grounds.

 

The manual is really great for all the info they provide on the wiring and harnesses.

 

G100, G101

92989173_Screenshot_20190713-190742_AdobeAcrobat.jpg.680d4f423a3c1b0e925c304f158d0ece.jpg

 

G107

831449796_Screenshot_20190713-185554_AdobeAcrobat.jpg.892fecd09b493e7f159a57f5958481eb.jpg

 

G200

1669419861_Screenshot_20190713-190132_AdobeAcrobat.jpg.a1be090bc2ad904828286305a681e9bf.jpg

 

Link to comment
Share on other sites

Thanks. I went back out and verified there is no trace on the wire.  Just a black wire.

I took a couple more pics also. There are 2 branches coming off the Loom, 1 going to LF ABS Sensor, and one going

to the Proportioning Valve. And the mysterious Black Wire. 

IMG_5382.PNG.57e141e8154f28f1a902647d209638cc.PNG

IMG_5385.PNG

IMG_5381.PNG

Link to comment
Share on other sites

×
×
  • Create New...