Gauges

[mrtowman4u]

Ok I know I have the edge juice with attitude and cts! I'm using it to monitor all my gauges! But I'm thinking about putting in a 3 gauge pillar mount, going with 60psi boost, 100psi fuel and egt gauges! What brand do you fellows recommend using? What is the best?

[Mopar1973Man]

Boost gauge is fine... Fuel pressure you got to use a 0-30 PSI fuel pressure... Because 15 PSI isn't going to move the needle much on a 100 PSI gauge... EGT's you want a 0-1600*F pyrometer... As for company take a peak at the manufacture listing... http://mopar.mopar1973man.com/cummins/manufacture/manufacture.htm

[volkswagon]

I'm using Isspro EV2's. I really like them. Got the set from Diesel Autopower.

[mrtowman4u]

Been looking at all the gauges! Really like the look of the glow shift gauges! Whatelse do I need to pep it up a little more?

[Perrysburg Dodgeboy]

I'm running Autometer only wish they had the OME Dodge gauges when I bought mine. Sure is going to upset Momma when I replace them!

My question is I want to add a fuel pressure gauge should I dump the boost gauge or add the fuel gauge using a Single

Steering Column Pod?

Here is a link to Diesel Manor they have a ton of install info on their site. http://www.dieselmanor.com/installsheets.asp

[mrtowman4u]

Keep the boost an add the steering pod with fuel pressure!

[Mopar1973Man]

Just for fun... My Old School DiPricol's that are no longer made... (I like these)

[volkswagon]

Keep the boost an add the steering pod with fuel pressure!