White night rear lighting system

[Rogan]

it's ok, mike. mine, too, is horrid. well, maybe not AS bad...

[ADawg]

Whats wrong with my pen ship? I am wrongfully accused!How do I know where to install each wire on the relay? Does it tell what wire goes where?You know you guys are the BOMB!

[Mopar1973Man]

You know you guys are the BOMB!

Thank you...

[Baconbitsforu]

Yea it will tell you where it goes. Each pole is numbered.

[Rogan]

Whats wrong with my pen ship? I am wrongfully accused! How do I know where to install each wire on the relay? Does it tell what wire goes where? You know you guys are the BOMB!

See pinouts..

http://forum.mopar1973man.com/attachment.php?attachmentid=4166&d=1339763562

[ADawg]

I was wondering if this housing will work for the napa bulbs 4509 its for a PAR 36 bulb Here is the website I found this at http://www.pmlights.com/products.cfm?cId=3&fId=11&pId=622#507LU

[Baconbitsforu]

Yes it will fit just fine. The napa 4509 is a par 34 bulb

[ADawg]

On Napa's web site it says par 36

http://www.napaonline.com/Catalog/CatalogItemDetail.aspx?R=LMW4509_0115941249

where did you get your cases at?

- - - Updated - - -

What about this one? I think its to small but what are your thoughts?

[ADawg]

Ok I think I am going with these lights what do you think? 20.95 for 2

http://rimiusa.com/index.php?main_page=product_info&cPath=43_27_28&products_id=112

[Rogan]

I've bought TONS of headlights off Rimi, when he was only on ebay. His lights are off-brand, but really good quality. Most (well, every pair I've gotten from him) are glass lenses, with metal housings (headlights), not that raggedy plastic. He's really good guy, customer service is great. I ordered 4 pair of the 200mm Euros, once, and one bulb arrived shattered. I sent him an email, and had a replacement that same week.

He's got these, too, for $14pr

http://rimiusa.com/index.php?main_page=product_info&cPath=35&products_id=22

[ADawg]

Cool! I am glad to hear about the customer service. I dont care if they are name brand or not as long as they do the job Now you are making it harder for me to choose with that price, but I may just go with the 100w ones so when my brother is on my butt i can give him a shot .

[ADawg]

Alright I did it I bought the 4 inch 100w lights from Rimiusa. I was thinking of mounting one in the hole in the bumper where the ball would go if you did not have a hitch wired in. It does not look like my tailgate would hit it any thoughts about this location?

[Mopar1973Man]

I would consider it... But I typically use the bumper there for a step to crawl in the bed of the truck.

[Baconbitsforu]

Would that not cover up some of the Lic plate if not all of it? In Texas they get real pissy about them LIC Plates

[Mopar1973Man]

Would that not cover up some of the Lic plate if not all of it? In Texas they get real pissy about them LIC Plates

Good point... I forgot about that...:banghead: Maybe that why mine are on the axles after all.

[ADawg]

Ok So I will look to mount somewhere else point taken :banghead:

[ADawg]

Ok I am getting ready to wire these up but I need some opinions I bought some metal electric boxes to help protect them but if you guys do not think they are needed then I can return them to save 10 bucks.

As you can see the light does not sit in there perfectly straight so I was going to angle it when I mount it. I am going to mount it to an existing bolt that comes off of the frame and hitch area. The next pic's are without the box. The lights only cost me 30 bucks shipped but I thought the boxes would help protect the lights a little more.

Any help would be great

[Mopar1973Man]

With all the debris I drive over I've never broke a back up light yet.

[Rogan]

yeah, I wouldn't worry too much with the boxes.

[ADawg]

Sounds good thanks for the advice