Jump to content
Mopar1973Man.Com LLC
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Programmers - Tuners?


Recommended Posts

  • Staff

There are 9 SW levels, and then Revo settings in each.

 

The VP trucks work a little different than the HPCR's, IIRC the VP tunes all make about the same peak power but the low/mid changes with the SW settings.

 

I am not a VPologist, but I would start with SW5 Torque 2, Timing 2, Duration 3 and go from there.

Link to comment
Share on other sites

There are 9 SW levels, and then Revo settings in each.

 

The VP trucks work a little different than the HPCR's, IIRC the VP tunes all make about the same peak power but the low/mid changes with the SW settings.

 

I am not a VPologist, but I would start with SW5 Torque 2, Timing 2, Duration 3 and go from there.

 

 

This is the REVO in each SW setting you can change?

Link to comment
Share on other sites

Revo is your timing, duration, torque. You change that then it uses it on whichever sw you put it to

OH! Ok, so I am guessing the duration is the injection (fuel) duration? If so that will help me control the smoke. I want more bottom end but I do not want to waste fuel doing so and pissing off my neighbors lol. I am already thinking of redoing the straight pipe exhaust (from previous owner) and putting a resonator in. I like the sound it is just too loud at 6am lol.

Link to comment
Share on other sites

×
×
  • Create New...