2nd Generation Dodge 24 Valve Powertrain

My buddy that I go drag racing with has a 98.5 with a 47RE in it. After racing this past weekend he asked me when does my converter lock when I'm going down the strip. I told him that it locks between 75 and 80 MPH. He was suprised and said his didn't lock until he wa about to cross the 1/4 mile line at around 94 MPH. He also said when it does that he's only dropping about 200-300 RPMs. Does this sound like he has a problem, and if so can the shift point be adjusted?Thanks in advance for your vast knowledge!

I've been reading that the Cummins engines in our trucks, when idling in cold weather, get buildup in the cylinders from an incomplete fuel burn; causing all kinds of mayhem in the motor. I was curious as to what's different with these engines? I ask this since all the other diesel engines I'm around on a daily basis (pulp truck , skidder, excavator, ect) will run all day long, with lots of idling in that time span, and yet it doesn't seem to bother them any? Looking for some clarification.

Ok i have the vulcan kit to take the intank pump out. I cut the line below the t and hooked the return to the output side as the instructions said. BUT my fuel pressure is to high. I unhook the return and it is fine is there a check valve in that t that will block fuel from returning to the tank. vulcan said cut the hose on top of the t . Any none else had this problem, If i do this will the return fuel still fill the canister. Wrong forum this is a 01 3500 if some one can move it

My truck a 2002 hd 2500 5 speed, threw the following codes today P PCU 1693, then P ECU 1689.Truck has been running great for 140000+ miles, I replaced the lift pump awhile back with flowmax from bd. It ran fine after the replacement no codes, and fixed the problem of the engine surging, when I first engage the clutch, had to fuel the engine up a little, even in first, but more present in 2nd. So i was thinking the stock lift pump was weak.I just added a Bully Dog Outlook with PE to the truck. After this I noticed the surging came back (when on a power level other than stock) especially when the engine cold, have to fuel engine up a little when engaging the clutch, or sur…

Now I have problems with my 4X4. I was driving in some deep snow and there was this small clunk and no more 4x4:banghead: Shifter works fine and there's no visable problems. Any suggestions what might have happened or where to look first?

I've got a buddy that bought a truck that has a FASS 150 fuel pump and he's trying to find new filters for it. Anybody know of a place in Canada where he could get them? Lots of options south of the 49th but I can't seem to find anything up here.

My truck has a 151,000 miles on it. I have been using synthetic oil for more than a decade in a number of other vehicles. I have noticed that on some of the vehicles that had more than say 50,000 miles on them, that a few of them developed oil leaks after switching to synthetic. When I switched back to petroleum based oil, all but one of them stopped leaking. My question is: Has anyone developed oil leaks once they switched to synthetic oil on a 2nd. gen. Dodge/Cummins that had say 50,000 or so more miles on it ? Thanks...Hood Latch

While poking around under the hood yesterday, I decided to check out the air box. The FILTER MINDER said everything is good... The FILTER didn't agree !!

Hey Guys, I thought i would post this link to buy the Vacuum pump seal kit from cummins online, This company { HOESLI DIESEL in Evansville,IN} is a Cummins Authorized Service center & distributor. As you will see on there site, they stock all Dodge cummins 5.9L diesel O.E.M. parts. There was a thread on CF yesterday where a Guy was quoted one from Dodge @ 112.00++ HOESLI DIESEL: PHONE# 1-800-487-1001 OR 1-812-473-5604 hoeslidiesel.com/store/page2.html Cummins part# 4089742 vacuum pump seal kit …

Guys, I just dug out my old scantool that comes loaded with domestic vehicles to 1999, just a year shy of my new to me 2000 2500 4x4 diesel. I am sure if I goto OTC they will say I need to buy the update software, but I think it ought to work don't you? Either that or does anyone out there have an update they want to sell for cheap?

:confused:

O.K , Today I noticed that when i idled up engine around 1800-1900 i noticed a slight miss{ fuel knock}. When i fuel it up to 2000 and held it there steady it got worse, 2100+ was worse. Injection pump & AirDog Lift pump 3-MONTHS OLD, new DDP injectors 2-MONTHS OLD I almost think its water in fuel but i thought the AD water seperator takes care of that getting these codes: PCU 0500 ECU 0230 Anyone know what this ma be?? Richie

I am pretty close to buying my first dodge diesel pickup, and I found a 2000 2500 club cab 6 speed camper special sport 4x4 for 9600. It is a 1 owner truck very well maintained with 166,000. The owner used it to pull a 5th wheel occasionally and here is the kicker....it has a 53 block. As of this moment there are no cracks or coolant leaks. What do you think? It is a really nice truck, but this and the typical vp44 issues give me pause before I pull the trigger. The other truck I am looking at is a 98 12v with 142000 for $9500. only problem with that is it has an auto transmission, which I feel would probably be more trouble than a manual. I like the idea of a 12v mostly…

is the CCD the same thing as CAN bus? does the obd2 access the CCD?

so at first i thought it was a leak! i have never had blow-by this bad EVER! so while i was snapping pics for the fuel/water sep i noticed this vac line...take a look at the pics...http://forum.mopar1973man.com/album.php?albumid=34 opinions please bryan

What do you guys think of mixing in a gallon of Rotella T "Synthetic" to regular Rotella T at oil change time?

Seems that Fass feeds too much pressure and the VP44 does not like it. The pump is controlled through a relay tied into the stock pump to supply pilot voltage to the relay coil, I guess just that split second that it puts pressure to the pump is enough to screw it up. If I wait, for the pressure to drop, it will start OK. I was thinking of putting a time delay relay on the pump? http://www.primelec.com/Electronic-Components/Relays/AGASTAT-12-Volt-On-Delay-p7886012.html

So I was having an issue with my tranny not locking up the torque inverter in od or with my switch! But was shifting fine and not slipping at all no other issues! So I bought all new electronics for the vb and a new boost valve spring retainer to have all the parts when I dropped vb! So I dropped the vb today The spring retainer wasn't broken but replaced with hd unit anyways! replaced all the electronics. and cleaned(not dirty at all) But the big FU is when I was lowering the vb two pieces fell off the top off it onto my head! http://i163.photobucket.com/albums/t283/74toyotafj/brokenband2.jpg http://i163.photobucket.com/albums/t283/74toyotafj/brokenband1.jpg They look li…

I wired up my high idle fooler according to moparman's diagram. With the IAT harness hooked back onto the sensor and just the coolant temp fooler on, the engine will still hit the 3 cylinder mode and the temp outside is around 34 degrees F. If I understand the system right this shouldn't be happening at temps this warm. Can somebody give me some ideas?

Hello All,I currently own a really nice 2004 F150 which I plan to sell to my brother and purchase a 2000 Dodge 2500 4x4 camper special Club Cab LB 6speed sport with 166000 miles 1 owner truck. It just had a new lift pump installed due to a recall that had not been done as well as several other items ...Brakes, vacuum harness for transfer case, tires batteries I forget the rest..Could you all give me a few ideas what I need to look out for as I am taking this out for a test drive and beyond? I am pretty sure I am going to purchase it if it everything the seller claims. Thanks for your input,Chris