OK guys the ol dodge has developed a new issue when I steer sharp like on a switchback curve I bump in like feeling on the steering when straighting up. I checked for bad wheel bearing and ujoints in the front and tie rods and bal joints all is tight a also checked and added some power steering fluid even though it was still above the add mark  could a power steering pump be causing this

Movement in track bar?  

Track bar is tight

Gear box need adjusting? I've done several box adjust for people helps greatly.

So the steering box can cause this well I believe mines beyond adjusting the seals have began to leak just been trying to get funds for a new one and power steering g pump and vaccum pump seal kit to do it all a once

Rebuild kit is roughly $40 for steering box to rebuild it yourself. Cummins vacuum pump seal kit is only $13 to rebuild the vacuum pump.

Rebuild kit is roughly $40 for steering box to rebuild it yourself. Cummins vacuum pump seal kit is only $13 to rebuild the vacuum pump.

I just had one done by Blue top steering gears in nd.  179 shipped from him.  

Does the kit have new bushings a bearings for the box

Be similar to this...

 

OK I'll have to look for a supplier 

On Tuesday, April 26, 2016 at 5:21 PM, CSM said:

I just had one done by Blue top steering gears in nd.  179 shipped from him.  

Good? 

Mine gets here this  week.

 

3 hours ago, JOHNFAK said:

Good? 

Mine gets here this  week.

 

Sofar.  I had issues getting the bolts in,  I kinda wish I had chased the threads before install.  

Hows the blue top box holding up? I just ordered one today...Ryan seems to be an awesome guy. Dropped what he was doing to build a box for me because I need it by the end of the week. Got it shipped the same day and everything....very reasonable pricing too!