Anyone know if these style retaimers will work to hold  the front plastic fender wells?

 

My factory ones are similar except they are big plastic pop rivet type

 

http://www.clipsandfasteners.com/Push-Type-Retainer-11-16-Head-Dia-7-8-Length-p/a14753.htm

 

Edited September 28, 20187 yr by GSP7

I had to hunt down the right size to get them to start in. Others the hole was stretched so I put in the next size up, but had to drill some. I had to keep trying to find some that worked. I found that Napa had packages with more inside and about the same price as other places only having a few inside and had more selection.

 

I've always had decent luck buying them in bags off eBay, I think I paid $5 for a bag of 75 a few months ago.

I got some for wives crv. WESCO Autobody supply looked up OEM number then ordered me couple bags, about 6 to each bag.  They called them plastic push rivets.  Many different sizes and types in there book.   But with dodge ram maybe hard part to get? 

6 minutes ago, 015point9 said:

I got some for wives crv. WESCO Autobody supply looked up OEM number then ordered me couple bags, about 6 to each bag.  They called them plastic push rivets.  Many different sizes and types in there book.   But with dodge ram maybe hard part to get? 

Should not be hard to get. Most likely not just used by dodge.

4 hours ago, 015point9 said:

I WESCO Autobody supply looked up OEM number then ordered me couple bags,

 

Well what is the part number of the front inner wheel well fasteners?

 

P,S, Looks like wesco doesnt have a website online store

 

 

.

Edited September 30, 20187 yr by GSP7

 

https://www.amazon.com/PartsSquare-Fastener-Retainer-Chrysler-Plymouth/dp/B012W3OUHG

 

Google search turned up this.

 

( I Didnt confirm in part number in part manual that has link in downloads section)

 

 

 

Edited September 30, 20187 yr by 015point9
Info