Posted April 19, 20196 yr Anybody made their own pop off tester? If so how do you like it? Digging around in my shed it looks like I'm real close with spare parts laying around...all except would have to buy a gauge. Any input good or bad for using a homemade tester?
April 29, 20196 yr If it was me Id buy a unit ready to run... Im all about homemade things but, certain items need the proper tools...
April 29, 20196 yr Author Thanks for the reply... by the amount of interest in this post I don't think very many people have made their own.
April 29, 20196 yr There is someone here that made their own IIRC. Don’t recall who it was. Might do a search
April 29, 20196 yr Author There's actually quite a few on YouTube that looks like a do the job but it's only Pop off pressure I'm not sure about the spray pattern. I think the days of spraying on a piece of cardboard to see what the spray pattern is are all gone.
April 29, 20196 yr Owner You want a nice clear cone shaped spray pattern. Should be even in shape. Then pop pressure for us starts at 310 bar (4,500 PSI).
May 8, 20196 yr I purchased one off of eBay, along with the Cummins / Bosch injector adapter. I think it came from India, and was very reasonably priced. However, I had to make some modifications. The gauge was crap, so I removed it and purchased one from a local ag supply store. The threads were not north american standard, so I had to get a little creative with an adapter and some JB weld, haha. All in all, I am very glad I have one, I've used it once for my Jetta TDI and several times on the Cummins. It's nice to be able to take my injectors out, re-pop, and replace in an afternoon.
Anybody made their own pop off tester? If so how do you like it?
Digging around in my shed it looks like I'm real close with spare parts laying around...all except would have to buy a gauge.
Any input good or bad for using a homemade tester?