Posted April 25, 20205 yr Can you use a pass. seat cushion on the driver side with very little mods? I realize the seat part #'s are different, but can they be made to fit?
April 25, 20205 yr Remove the 4 nuts and swap them. Nothing to it. My passanger only lasted about half as long as the drivers seat. Different material on sides. No mods necessary. Edited April 25, 20205 yr by dripley
April 30, 20205 yr Not much to explain, Did this on my truck. remove passenger side > install to driver side.
May 1, 20205 yr Author Okay, I thought they had different part #'s. Thought I looked at it before and holes for the spring didn't match up, my spring is broken also.
May 1, 20205 yr they are different slightly, but it is easy to come to terms with the differences if your drivers side is bad enough.
May 1, 20205 yr Just swap them. The passanger is better in a way. It throws you more right than left.
May 1, 20205 yr Owner Another solution is just to buy need seat foam from Geno's Garage and just replace it.
Can you use a pass. seat cushion on the driver side with very little mods? I realize the seat part #'s are different, but can they be made to fit?