Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Towing a large bumper pull on Monday

Posted

Got a ebay message from a guy in response to my ad for American 5th wheel and TT towing service

 

He wanted a cost to tow a bumper pull from South Ockendon near Thurrock in Kent (south east coast) to Newquay in Cornwall (south west coast)

 

South Ockendon is 130miles from me, Newquay is 300miles from South Ockendon and then around 300 miles home

 

So around 750 miles total give or take

 

I'm figuring my truck would be around 15 mpg (uk gallon) on the towing 300 miles so around £170 for that bit

 

Might get over 20 for the 450 or so miles not towing so at 20mpg that might be around £200 ish so if it cost me £370 in fuel I'd be happy at that.

 

I thought I'd overquoted @ £900 but he bit my arm off

 

Worst thing is it's South and part of the tow is around the M25 which is pants and it's 5000kg, my own bumper pull was 6500kg and my truck managed that ok, we'll see

  • Replies 8
  • Views 923
  • Created
  • Last Reply

Featured Replies

  • Staff
57 minutes ago, wil440 said:

I thought I'd overquoted @ £900 but he bit my arm off

"bit my arm of" British slang meaning overly excited to get something.  Next time add 10% and call it a 'Fuel Surcharge".  You can always go down in price.  

 

1 hour ago, wil440 said:

part of the tow is around the M25 which is pants

"which is pants" British slang meaning rubbish; something worthless.  Your tax money at work.

  • Author
40 minutes ago, IBMobile said:

"bit my arm of" British slang meaning overly excited to get something.  Next time add 10% and call it a 'Fuel Surcharge".  You can always go down in price.  

 

"which is pants" British slang meaning rubbish; something worthless.  Your tax money at work.

@IBMobile  bang on, you'd fit right in here :)

think in all the M25 and everything inside it (London) and everything within a 60 mile radius is the very worst of the UK 

  • Author

Well got it all moved 

768 miles round trip,  300 towing the trailer which turned out to be probably the worst 300 miles ever as the trailer brakes weren't working and Cornwall gets rather hilly, steepest was 11% up not bad, down not so good,  only good thing motorway the whole way except for first and last mile or so.

The trailer had been towed before by a Scania truck so all the bulbs were 24v so lights were like candles 

Glad it's done

truck used £350 in diesel 

And can someone turn the picture the right way up 

 

fixed.jpg

done,  sucks that the brakes were not working.

Is 24 volt truck the reason brakes don’t work?

  • Author
22 minutes ago, Me78569 said:

done,  sucks that the brakes were not working.

Thanks, not sure why most if not all of my pictures come out upside down on here, they are right on my mobile, laptop etc, thing is if I rotate them first so they are upside down on my stuff they still come out upside down on here, same outcome if I post from Mobile or laptop too

15 minutes ago, Royal Squire said:

Is 24 volt truck the reason brakes don’t work?

My truck lights and brake are on UK 13 pin plug, my truck also has a UK 7 pin  but the brake controller wire isn't fitted into that one as there wasn't a spare pin hence why I went 13 pin

 

This trailer had 7 pin plug, I took a quick look but couldn't see the brake wire, thinking about it now (after the event) it had a 12v battery on the front with a couple of relays along side it wired into what I figured was the brake control, I wonder if it was actually 24v control hooked to a relay to operate the 12v brakes.

The Scania that was used to tow it was HGV so brakes wouldn't have been an issue anyway as it would weigh around 18k kg or more

 

  • 2 weeks later...
  • Author

Yes me too :stuned:

Archived

This topic is now archived and is closed to further replies.

Did This Forum Post Help You?

Show the author some love by liking their post!

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.