Steering kit

[lrhull]

Where's the best place to get the whole kit to replace all my tie rods etc.

[CTcummins24V]

Fill out your signature. If you have a 2000-2002, you can use this...

 

52122362AL

http://www.rockauto.com/en/partsearch/

http://puredieselpower.com/dodge-products/mopar-09-steering-upgrade-kit-for-03-08-ram-2500-3500-trucks.html

 

[notlimah]

How big a difference does that kit make? I was looking at DOR's but close to a grand for that is pretty steep!

[CSM]

Check out my article for later models as well.  I got mine from amazon, full mopar kit. 359 or so iirc.

 

It made a big difference on mine.  I also have a diy alignment article as well.

Edited March 28, 2016 by CSM

[notlimah]

So the 03-09 kits fit our trucks? Do you have a link to the one you got on amazon?

 

I've seen your alignment article, it's real slick. I might have to try that out.

[Me78569]

OR this article for early trucks

 

 

[lrhull]

I'm looking at going with moog tie rods over the cheaper ones at the auto parts store. Has any tried moog products?

[TFaoro]

Moog has gone down hill from what I hear. No personal experience, that's just what everyone says.

[Me78569]

The last group of moog parts on my truck didn't last at all.  I could use the Ball joints as bells after 10-15k

 

I went Rayebesto on my wifes truck for the entire front end and it is staying tight.

Edited March 31, 2016 by Me78569

[Mopar1973Man]

On 3/31/2016 at 10:51 PM, TFaoro said:

Moog has gone down hill from what I hear. No personal experience, that's just what everyone says.

 

Here is a 6 month old Moog...

 

http://imgur.com/r/justrolledintotheshop/R4d3rys

 

Edited April 1, 2016 by Mopar1973Man

[lrhull]

So what brand should I buy?

[Mopar1973Man]

I typically just buy the NAPA brand stuff since that's all we got up here. I don't go out of my way to hunt for name brands or the OE stuff any more. Most of this stuff is all China made so it doesn't matter any more.

Edited April 2, 2016 by Mopar1973Man