Introductions

Hello, everyone! I ve been a lurker here for a while and figured i have some good input to share and input to learn from by others. I bought my 2001 cummins 3 years ago, since then i have done alot of work to it including vp44 failure (no hot start) that happened right when i started researching failure points on the truck. I spent 6 hours replacing it, the lift pump and installed an edge juice. It now runs the raptor 150 lift pump, and i have had zero problems since. This site also started me on using 2 stroke oil for lube and it actually made a bit of difference. I have been wrenching as a hobby/desire to save money by doing it myself since i was 5 or so…

I cant seem to find userCP. Signature page. I looked under my settings

I can hear the groans....'geesh.. him again'. LOL anyway lifes' beatdowns aside, and a new ISP (no longer Hughes.net) I was fortunate to have a cell tower built about 6 miles from me so i thought i'd give it a whirl. I'm getting about double the speed up and down, and my current plan is 3x the data for approximately half the price of my late satellite provider. No blackouts due to cloud cover either..' Long and short of my absence is well, farming and ranching is highly mechanized, and the past couple of years has been soul sucking on my mental health... keeping stuff in running order.. …

Hi everyone, might recognize the name from CF, just here to branch out and see what I can learn from reading post, also get help when I need it. Dabble in about everything mechincal from the weed wacker to heavy equipment. even been known to do alil construction here and there when the ol homestead needs it.

Hello all from Indiana, I'm a newbie, just bought this truck, 1st Dodge 1st Cummins I honestly wish I had gotten into these things 25yrs ago.

Jerry from Ruther Glen, Va. ’02 2500 Quad Cab, 4x4, NV5600, 4” exh., Edge Attitude, 202,000 miles, daily driver. just getting started with this project.

Been a member for a mo and figure it's about time I introduce myself I'm a retired plumber ,live Tucson Az Bought my 2002 Dodge club cab auto trans new in nov. 2001.I just put a industial inj. vp44 and a fass w/ drop straw and big line kit ,also had Auto electronic solutions rebuild my bad ecm,only had to send it back twice before they got it right. Thanks Mike for all your help on the phone the other nite,and thanks to all you members for for all your postings. 2002 dodge club cab, auto,4x4, winch, 1-/12 square16 ga. rhino coated side bars.Industial inj. vp44 fass w/ big line pod w/ fuel pressure, boost,and exh. temp.gauges 1991 22ft. Terry 5th wheel.

My name is Kenny. Been following mopar1973man across several platforms/forums for about as long as I've owned this truck which has been since July of 2016. I'm no stranger to Dodge Cummins trucks but don't know everything. This is my first Cummins but growing up my dad had an 02 Laramie duallie an 06 megacab duallie and he now has a 2015 2500. We've done a fair amount of work and modifications to these trucks except for his new truck so like I said I'm no stranger to these trucks. I also currently work at a dodge dealer and have been since February of 2012. So if anyone needs any factory direct information I may be able to help although they keep me pretty bus…

I just saw the intro section, and I apologize for not properly introducing myself.I'm 48 and we have 3 Cummins in the family:92 D250 Extended Cab longbed, Auto. ~400K99 2500 SLT Auto 275K06 Mega Cab, Auto 145K

Good morning! Glad to be on this forum. I've owned my 5.9 for two years now. I have been reading on here off and on for quite a while. Seems that there is a lot of useful info here backed up with facts not guesswork. I'm looking to upgrade to a Quadzilla Adrenaline(V2) in the near future and would appreciatte all the help I can get. Hopefully I can provide some some useful info through my upgrading process. I would prefer good, clean power out of my Dodge as I use it for pulling, without complicating things under the hood too much. Thanks for all the help up front.

Hello, joined the forum recently and have been lurking over the years. Ordered the truck in my signature January 1999 and received delivery April 1999 with the intention of driving for 20 years or 400,000 miles, whichever came first. With 19 years and 253,000 miles on the clock I can sincerely say I have enjoyed every mile driven in the truck. The Dodge/Cummins has been so reliable and fun to drive I'm planning on keeping the truck well into the future! Been doing my own maintenance since NEW and have changed the oil and rotated the tires myself every time! And with the many things to learn on this forum I'm confident problems/repairs/fixes can be sorted out wit…

Howdy! Lance from Phoenix, here. My daily driver is a 2016 RAM 2500 Laramie Crew Cab.

I've been poking around here for a while and finally made an account. I bought my truck in 2012 with ~210,000 miles for $5,600. It just had the VP and lift pump replaced (albeit Airtex) a few months before I bought it. One previous owner who I've known for basically my whole life who took good care of. Never towed anything more than a 21' boat. Thanks for the wealth of information here! Invaluable resource! -Tyler

Just joined. Noob here from NY.

New guy here. My everyday driver for about 8 years now is a 1995 Reg Cab 2500 4x4, 12v and I love it! However, just this week I picked up a 1999 3500 Extra Cab 24v 4x4 for what I thought was a really good price. It's gonna need some tlc though. This place looks to be a wealth of info. I look forward from learning what I can from you guys!

Don't think I've ever introduced myself on here so here goes. My name is Scott and first I want to thank everybody for such kindness and great feedback. I really look for that in a forum. I don't cuss, don't drink (maybe a beer or two per year though some of my truck mods/repairs I've done should have required whiskey!) I'm happily married for 16 years and have 3 wonderful kids (11, 9, & 6). We cannot emphasis how much we LOVE camping trips together and that involves pulling with the ole mule. I'm happy to say today that I got my first compliment on my rig from a co-worker who is a chevy guy. He said that it was the best running 2nd gen he's ever been in! I own …

hey nice looking site, stopping in from Ontario Canada.

I am a new member here, but I have been a member on cf for a while. Very nice forum here, I like it.:DSent from my Droid using Tapatalk

Hi everyone, I'm new to the forum and this is the first Diesel pick-up I've owned. Spent a lot of time with the big Cummins' back in the day, so the Cummins/Dodge was the only choice when I decided go diesel .. I've been reading lots of info on here and just found my way down to the intro section!

Just found this forum while doing some searches for a manual. Looks like lots of good info here. I have a 2007 megacab and a 2004.5 quadcab. both 4x4s and automatics. I am in the middle of a rebuilding the engine in the 04.