2nd Generation Dodge Non-Powertrain

This is my new project. I've got the tig, the cutting tools, sander, etc... I found the basic steel design photos but was wondering if anybody had any input. I was also thinking if I made one I might as well make two. Whats a fair price for a good aluminum bumper?

i just got my kit today from daniel stern. kit rik-ram. has anyone installed this kit on there truck yet? i need some help with it. here is the link he emailed me how to in stall it-http://www.danielsternlighting.com/tech/relays/relays.html i looked at the link on how to install it. but in the diagram it shows 2 relays??????????? but in the kit i got it has 3 fuses and 3 relays???????????? where does the 3rd relay and fuse go???????????? i did not get any kind of instruction sheet how to install this for this type of truck?(Dodge ram)

my gauges started acting funny today, all gauges drop all lights come on and trip/odometer flashes. im going to check for bad connection on the gauge cluster in a few min. but i have a bad feeling that its the PCM. Anyone else have this problem or have any ideas? also alternator is still charging(fuel pressure does not drop, it drops 2psi with key on/ engine off) and no performance problems.

It was a nice day out, and i had the camera, while working out some bugs in the front end... Most recent today, with the traction bars fully installed, and hopefully, the bugs with the front end worked out...

Ok, so I've got a 96, with the EMS offroad lockout kit installed, and i've been pulling and reinstalling the drivers side lockout multiple times in an effort to figure out what exactly is going on with the noises I'm hearing...I still swear it's the bearings, but I haven't been able to identify for sure...If anyone's near Camp Lejeune, NC, I'd love some help!:banghead:However, I recently started thinking, what are the differences in the knuckles and mounting between the 96 and 2001? The reason I'm asking, is that I'm wondering if there's a way to adapt to the 2001 disc brakes, so I can avoid having to press the rotors on and off the hub. This would be specific to the DR…

So I picked up a Revtek 2" leveling kit last night and now I want to get some air bags so the rear doesn't sit lower than the front with a load on. What brand are you guys running? I like the look of the Firestone 2220 no drill kit. But I found a Airlift kit local that is new in the box for $300 obo. The only issue is it is an outboard kit between the frame and the tire and is a smaller bag than the Firestones, I just want the best ride possible for the least money...lol Not asking for much am I?

ok i got both headlight wiring harness on the truck. it all dims ok. but one question it just might be me. but to me looks like when you hit the dimmer switch for high beem. the headlights just blink?? it looks the same as low beem other then high beem is slightly brighter?? and its in the same spot on the road as the low beem? i do have new sport headlights on the truck as well?? shouldnt the high beem when its on be out further on the road then the low beem?? am i missing somthing????????????? Thanks

OK, I had issues with alternator for awhile. The voltage would be at 10 volts when starting and slowly drop to 8 volts after running. Figured alternator because when when measure withm eter at battery, was only reading 12 volts and it would slowly drop. Tested alternator and tested bad. Replaced. Ran good for week, then same thing. Another bad alternator. Replaced. Checked codes, 1682, 0622,0500,1765,1693, 0501. Figured the pcm isn't seeing whati t needs to see to turn on alternator. I installed the external VR to the firewall, after sandig the paint off (good ground). Wired the blue wire to the Vr, top post, to a switched hot when key is on and added a wire to run to the…

i had there headlight wiring harness conversion on 2000 ram before i went through bankrupcy back in 2009-2010. now i got another truck. i went to there website to order another one. and there website seems to be down?? been checking back for few monthes and still no change. please forgive if this is not the right spot to post but not sure where to post it. whats the deal with www.suvlights.com ???? also anyone have a wiring harness from suv lights that i could buy used????

Just thought I would post up real quick about an issue I was having with my tow mirrors. First off, my truck is a non power truck so needless to say I did not purchase power mirrors which have more "stuff" behind the mirror part and do not vibrate as bad. Anyway, like I said, I had a lot of vibration sitting at idle or traveling down the road, so I decided to take the mirror apart and sound deaden the back of the mirror to absorb some of the shake. Took me about 1 hour between being anal about it and shooting the bull with my bud that was changing his oil...Here is what mine looked like off the base after I placed the "Cool It" acoustical suppressor mat on. …

Both my trucks alternators are showing the voltage of leaking AC to be too high, around .29 V ac. Is there such a thing as a filter to filter out the AC noise?

Picked these up locally last night for $400. Came off a 2012 with under 10k miles on them. Been looking for a while and have not had any luck locally until these babies showed up on Craigslist on Monday. So after working 13 and a half hours yesterday I jumped in the truck and drove an hour and a half each way. He had someone coming to look at them this morning and I didnt want to chance missing out on them. So my question is can I use my lug nuts on the new wheels? What are you guys with 4th gen wheels using?

The steering box in my truck has quite a bit of play even after I adjusted it. It has annoyed me long enough:banghead:. Time to replace it with something better I think its an autozone special that the guy before me put on. I'm thinking about a Borgeson new box or a rebuilt one from Red Head steering. Any input from anybody out there that has used either would be greatly appreciated.

Ain't that a peach?!?! :facepalm:I guess I'll be ordering clips or pins or rollers or whateverthehell holds the window to the regulator.. I hate this truck.FML.

Alright, so sometimes driving down the road, I will experience the truck drifting to one side or the other. It does not matter how fast or whether or not I'm accelerating, crusing or braking. I dunno if this is from loose steering tolerances or something else going on?I've had an alignment within the year and grease my components every oil change. Any ideas?

Do I need the whole thing like NAPA part number: 530924. Or is there just a sensor that I splice into, sorry if this has been answered but I couldn't find it in the search.FYI- my speedo works so it is one of the front sensors. I will be changing out both, just need to know what to get. Part numbers and site found are appreciated.Thanks in Advance!!!

True Jake Brake coming soon. http-~~-//youtu.be/xT0Ua2ogGJQ If you search them on youtube you will come up with other videos!! Here is an 'update' from them: (Because of 'bandwidth' problems, I can't seem to post up the other videos.....) --------------------------------------------------------------------------------------------------------------- ByCompressionRelease Dec 21, 2012 4,203 views 24 likes, 0 dislikes UPDATE: Ok guys, thought we should let you know how this project is going. First of all, this is still our number one priority, and though it seems slow, we are getting ever closer to a finished product. I read a statement on a Cummins forum one time, …

Checked every fuse in panel on left front fender under hood. None blown. Also didn't see tail light fuse. Is there another fuse panel?

hello every one i just purchesed a 94 dodge cummins with a 5 speed manual i've owned it for 10 day now and a few issues have come too my atention the big one is low speed engine shutter it feels like the engine is starving for fuel when your just crusin (4 or 5 gear 40 to 50 mph) and when i push the clutch to shift down the rpms start to spike or tac out and then shuts down as soon as it dose i can start it right back up again and some time be fine or it will do this severl times any ideas on this one

ok i did this thead the way it said to do it. http://forum.mopar1973man.com/threads/3311-The-moment-you-ve-all-been-waiting-for-quot-SPORT-QUAD-HEADLIGHT-CONVERSION-quot i got the driver side done and went to test it on my 99 ram 1500 4x4. i was told on another fourm the 1500 and 2500 lighting conversion was the same. anyway i ran into a small problem. the harness works ok. only small problem is the dimming switch is backwards. when the blue high beem indacator is on the dash its on low beem. and when the high beem indactor is off its on high beem. can someone tell me what i did wrong and how i can fix it?