Mods that I have that benefit my 2nd gen...

Gauges

 Fuel pressure with led light

Egt 

Trans

 

Fuel system half inch, air dog set at 19 psi

Deep dish trans pan

 

For the future...

Latest mod to wiring (Not sure of name)

Trans rebuilt (this summer?)

Going to check/fix killer dowel pin

Pull out dent mom in law gave me.

Towing mirrors

 

What are your bulletproof mods?

That truck is a 2016 with 270k miles on it.  I had a 06 and 07 that lasted about 500k each.

7 minutes ago, cajflynn said:

That truck is a 2016 with 270k miles on it.  I had a 06 and 07 that lasted about 500k each.

Why did they only last 500k?

13 minutes ago, cajflynn said:

That truck is a 2016 with 270k miles on it.  I had a 06 and 07 that lasted about 500k each.

Jeebus that is a ton on a 2 year truck!!! I would have never guessed it had 270k on it! My 01 has 310k now and it looks like hell.....

Because my 3rd gens all had injector problems.  I blew quite a few motors after an injector or two got stuck open.  My 4th gens have been far more reliable.

3 hours ago, cajflynn said:

Because my 3rd gens all had injector problems.  I blew quite a few motors after an injector or two got stuck open.  My 4th gens have been far more reliable.

The legend himself, nice to meet you sir. I'm with you on 4th gen if I ever get a newer truck I'm skipping over 3rd gen straight to 4th like i did with pagers. Glad to see you still around. 

9 hours ago, cajflynn said:

 

Did someone say my name?

So good to meet you sir! MY I ask of the engine has been rebuilt?

Nice to meet you too.  I haven't been here in a while. It's nice to see everyone still marching on.

1 minute ago, Marcus2000monster said:

So good to meet you sir! MY I ask of the engine has been rebuilt?

 

My 01 was never rebuilt.

5 minutes ago, cajflynn said:

Nice to meet you too.  I haven't been here in a while. It's nice to see everyone still marching on.

 

My 01 was never rebuilt.

Did it ever crack? My 53 did around 290k I think now I have a Taco Block

 

8 hours ago, TheGreatWhite said:

Did it ever crack? My 53 did around 290k I think now I have a Taco Block

 

 

No.  Mine never cracked.

9 hours ago, cajflynn said:

Nice to meet you too.  I haven't been here in a while. It's nice to see everyone still marching on.

 

My 01 was never rebuilt.

Wow that is crazy! 

5 minutes ago, Marcus2000monster said:

Wow that is crazy! 

 

@cajflynn is my inspiration on the 2nd Gen. After watching him cross 1 million miles I know anyone can do it. Just sad to see 3rd gens 500k lifespan. Ive actually heard lower like 300k miles. Then the expense of replacing injectors too.

4 hours ago, Mopar1973Man said:

 

@cajflynn is my inspiration on the 2nd Gen. After watching him cross 1 million miles I know anyone can do it. Just sad to see 3rd gens 500k lifespan. Ive actually heard lower like 300k miles. Then the expense of replacing injectors too.

Dads 06 made it to 460 and he sold it and he has stayed in contact with the buyer. He is almost to 500k but he truck has quite a bit of blow by

9 minutes ago, Marcus2000monster said:

Dads 06 made it to 460 and he sold it and he has stayed in contact with the buyer. He is almost to 500k but he truck has quite a bit of blow by

 

Nice to see a few made close to 1/2 million. Like around here most of them seem to be blown up around the 200-300k miles range. 

13 minutes ago, Mopar1973Man said:

 

Nice to see a few made close to 1/2 million. Like around here most of them seem to be blown up around the 200-300k miles range. 

That’s awful. They should easy make 600k

1 hour ago, Marcus2000monster said:

Dads 06 made it to 460 and he sold it and he has stayed in contact with the buyer. He is almost to 500k but he truck has quite a bit of blow by

 

I used to test blowby by removing the oil cap and set it back down on the fill hole upside down.  If the blowby was so bad the cap fell off, the motor was done.  If the cap didn't blow off, I kept going and checked it regularly.  

Edited May 7, 20186 yr by cajflynn

@cajflynn what oil did you prefer on 2nd gen and what do you use now

47 minutes ago, cajflynn said:

 

I used to test blowby by removing the oil cap and set it back down on the fill hole upside down.  If the blowby was so bad the cap fell off, the motor was done.  If the cap didn't blow off, I kept going and checked it regularly.  

I've heard that like 95% of blowby can be fixed by pouring some product into your oil I believe and it'll remove the carbon. They use it on semis from what I've heard.

On 5/6/2018 at 2:29 PM, cajflynn said:

 

Did someone say my name?

It sure is nice to see the legend return. I hope you can keep in touch with us 

 

L8tr

D

4 hours ago, TheGreatWhite said:

I've heard that like 95% of blowby can be fixed by pouring some product into your oil I believe and it'll remove the carbon. They use it on semis from what I've heard.

Also by not having any vacuum leaks and a good crank case vent

5 hours ago, Dieselfuture said:

@cajflynn what oil did you prefer on 2nd gen and what do you use now

 

Delo on my 2nd gen. Don't care on the 4th gens.