Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Posted

Can I install quad and run at “stock” levels?

If I can run at stock power levels... the valet power level used as theft protection and the turbo cool off setting will come in handy ( I think it has turbo cool down). And the MPG tune shouldn't put any stress either I would assume, but could be wrong.  Then after getting trans rebuilt and with a towing tune,  it should help somewhat pulling 9,000 pound trailer on hills.   

 

Thanks,  your thoughts

  • Replies 6
  • Views 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

Featured Replies

  • Owner

Level 0 = Stock ECM

Level 1 = Valet Mode

Level 2 = CANBus fuel only to 100%

Level 3 = CANBus fuel

Level 4 and up are wire tap

 

MPG is about finding the lowest engine load with timing. Most will say 19 to 21 degree for timing will produce the lowest engine load.

I'd get it, never know what doors it will open for you. 

@Mopar1973Man @Me78569if 4095 is max  for canbus, where is it top out on level 2 at 100% 

  • Owner
6 hours ago, 015point9 said:

Can I install quad and run at “stock” levels?

 

You could just set the fuel map to 100% all the way and the Quadzilla is on a stock tune. Then you can play with timing too.

  • Owner
33 minutes ago, Marcus2000monster said:

Can you have a stock fuel curve tune with advanced timing for mpg?

 

Yes. Like I said just set the fuel map for 100% across the board and your stock fuel rate. Then set the timing for what you want. Again you just want to inch up the timing just enough to reduce the engine load. MPG tune on stock fuel...

yep you can easily do this.  

Did This Forum Post Help You?

Show the author some love by liking their post!

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.