ok heres the case after my recent lift pump failure i have decided to save up an hopefully invest in i fass fuel system prob a fass 95 my question now is with this system my concerns are the pick up tube and stock filter housing does the kit come with the filter housing to vp big line also are these kits effictive with the factory pickup tube and stock filter housing or are they too restrictive to support the 600 hp they say the pump will support

From what I have read if you are going to make 600 HP you will need a different filter system and the stock banjo bolts are too restrictive

well in not tryng to get 600 hp yet but would like to hace the full benifits of the system plus keep the factory fuel heater and wif sensor

I ran my airdog2 165 through my stock housing

Get a big line kit that goes in between the filter housing and VP44, it comes with the larger banjo bolts for the bottom of the filter hsg and the VP.

 

I ran a 150 FASS HPFP on my 02 for many years at 560 hp with just 3/8 line from the top of the tank to the filter head and not a single issue. just tied into the factory pickup tube on top of the tank.

ok thanks were can i get the housing to vp kit

UMMMMMM.....go to one of the vendors that advertise in the banners at the top of the screen here on this site like maybe Vulvan or DAP and simply click on the banner. Took 3 clicks to get to this from the Vulcan banner right on the top of the screen.http://www.vulcanperformance.com/category-s/182.htmBut wait there is another super easy option, let me show ya how.http://lmgtfy.com/?q=cummins+big+line+kit

Edited December 23, 201311 yr by Wild and Free

I ran my AD thru the filter housing also with the big line kit from Vulcan. They are all petty similar. 

 

But wait there is another super easy option, let me show ya how.

U soo funny

what kind of numbers can the stock filter housing support with the big line kit

easy 600, I was at 560 hp through it alone as the only filter in the system other than the suction screen pre FASS with absolutely zero issues and still 15 psi at the VP44 at WOT while power pulling.

That with 3/8 line from the factory tank pickup to the factory filter with bigger banjo bolts and the 1/2 inch big line between the filter and VP44.

Edited December 24, 201311 yr by Wild and Free