
Everything posted by Silverdodge
-
2019 clean air act
My 11 will not smoke at all
-
2019 clean air act
This applies to all diesels from 12 valves all the way till brand new it is technically a federal crime to adjust timing on a 12 valve same with deleting a DPF they view it the same ppei got a 8 digit fine over this it's targeted at all trucks and cars if we lay down and get ran over now it's the end of Motorsports look up the diesel podcast on YouTube all info is there EPA is watching all socal media I wonder if there here also
- I made the jump
-
I made the jump
Such a fun driver
-
I made the jump
Sold the second gen and jumped to a deleted tunes 4th gen 2011 has the air valve delete h&s tuning trans mods ect not perfect but a good price
-
Installing Isspro FP gauge in stock 01
Over 2 years
-
Installing Isspro FP gauge in stock 01
Bull **** Been over 2 years of this
-
Installing Isspro FP gauge in stock 01
Well I run 40 to 50 psi sooooo
-
7x.010 to 7x.012s
I'm buying a set of dap new to me injectors local there 7x.012s I have worn out 7x.010s I plan on sending the used 7x.012s in to be repoped then putting them in with new cross overs and o rings I'm pretty excited I'll probably drill the edge filters out tho we will c
-
Installing Isspro FP gauge in stock 01
I really need to put a e guage in my Piller for this sigh lol I run a sump half inch line to air dog half inch return to sump half inch to motor fps in top of airdog on port reading way over recommended pressure but all good lol 2 years of super high pressure
-
Which Torque Convertor To Get
Half qt every 10 k here
-
Which Torque Convertor To Get
I'm actually heading to goerend tomorrow
-
Which Torque Convertor To Get
Billet low or stock stall single disk
-
Well 52 psi
I've ran all 3 same truck quad is better by far fyi edge smarty quad
-
Slow spooling turbo
S400 on my truck with that oooooooo
-
Slow spooling turbo
-
Slow spooling turbo
His truck has more fuel then mine with the hot rod pump and mine lights at 1500 with 355s and 35s it's a blast to drive and keeps it cool on the highway
-
Slow spooling turbo
I say agp for company they ether have there housings cast for them or cast there own don't remember but what ever it is works lol And there customer service was awesome
-
Slow spooling turbo
I'd say all the gate does is keep it from over spool but as long as u don't hold over 55 psi I'll be fine unnecessary stupid **** I say 64 68 14 would be fun
-
Slow spooling turbo
-
Well 52 psi
Well I'm with in 2 PSI of boost mechanical to quad and 50 degrees mechanical to quad
-
Slow spooling turbo
Do whatever u feel is right for ur life style I had one of those and same injectors I replaced the turbo and was night and day different
-
Slow spooling turbo
The Bd Switzers are just absolute garbage a nice s300 sxe
-
Slow spooling turbo
Buy something else
-
Well 52 psi
Both are vary close to mechanical guage readings it's a the 14 cm non gated hot side