• Announcements

    • Mopar1973Man

      Quadzilla Tunes   06/12/2017

      QUADZILLA TUNE REPOSITORY - There is now a Quadzilla tune download area. When you submit a tune file to the download area it will automatically create a forum topic that allows discussion of your tune. So export your tune and upload it to the site. Then we all can help out in building better tunes. Check it out gang...
    • Mopar1973Man

      911 Support Group   06/22/2017

      Hey Gang, I've got the 911 support group database back up and running once again. It's listed in the 911 support category. It will allow members to list their contact information and location so other have a listed of members to call upon in the time of need. So if you wish to support other member please stop by and add your listing into the database. https://mopar1973man.com/cummins/911-support.html/contacts/

Archived

This topic is now archived and is closed to further replies.

ELKSLAYER

Low $$$ stacks

13 posts in this topic

$150.00 totle cost. THE 5'' STACKS ARE STAINLESS AND CAME FROM EBAY. COST $100.00

The crossover came from scrap yard $15:00. 2 band clamps cost $12:00.The elbow came off of a old pipe I had.

The section of flex pipe cost $21:00.

Posted Image

Posted Image

Posted Image

Share this post


Link to post
Share on other sites

Can't post pics of it strapped to a dyno with no numbers to show whats shes got for HP/TQ.:doh:

Share this post


Link to post
Share on other sites

Some one had to get this place going.:tease: 303RWHP 816RWT

Jeez, I was figuring on like about 800hp and 1500ft.lbs. with you set up!!!:doh::cookoo::lmao2::lmao2::lmao2::lol::lol::lol:

Share this post


Link to post
Share on other sites

No you don't then you'd be breaking stuff all the time... :doh:

Seems 600 hp and 1100-1200 tq is the starting breaking point for parts depending on use and common sense. I don't have any issues with the 02 in my sig.

Share this post


Link to post
Share on other sites