@pepsi71ocean

 

Here is the fuse crimp for the PDC.

https://www.mouser.com/ProductDetail/TE-Connectivity/881572-3?qs=sGAEpiMZZMvfFCidbTccAx7grAeSIDrq1vx0szo98wY%3d

Here is an accessory PDC for homebrew.

https://www.online-led-store.com/ols-12-slot-fuse-relay-box-for-bosch-style-relays-blade-fuses-pszacceps310h

 

Edited January 20, 20196 yr by Mopar1973Man

That accessory PDC looks like it may work for me.  I've got someone who wants my torque converter lockup system along with a grid heater bypass switch with resistors installed in their truck and this should handle all the relays and power fuses I need to use.  

@Mopar1973Man check this out

 

https://www.cumminsforum.com/forum/98-5-02-non-powertrain/1502386-onboard-air-compressor-powered-cummins.html

 

https://www.cumminsforum.com/forum/3rd-gen-non-powertrain/463064-york-oba-edc-install.html

 

Edited January 21, 20196 yr by pepsi71ocean

@Mopar1973Man so I was thinking of the motor has rubber grommets on all 3 bolts is this motor still grounded to that plate? What should I do about adding another ground?

 

Well I just checked it. It is not passing an ohm test. 

I like the PDC box, but it would take me a year to clean my wiring mess up and put it all in that box 

4 hours ago, Dieselfuture said:

I like the PDC box, but it would take me a year to clean my wiring mess up and put it all in that box 

I feel your laughter!!!

4 hours ago, Dieselfuture said:

I like the PDC box, but it would take me a year to clean my wiring mess up and put it all in that box 

 

Wait till you see my mess of a truck!

3 hours ago, pepsi71ocean said:

 

Wait till you see my mess of a truck!

 

I don't have to see it... I've already heard about it. 

I think IBMobile took a pic of it that ended up in the American wiring digest.