Posted March 20, 20196 yr Does anyone know if the trucks are pre wired for power mirrors? So I would just need the control and power mirrors to convert the truck? https://www.ebay.com/itm/DODGE-RAM-1500-2500-3500-DURANGO-TRUCK-POWER-MIRROR-CONTROL-SWITCH-KNOB-BK-94-02/113577448786?hash=item1a71be5552:g:kwQAAOSwoN5cQ7d2 will this one work?
March 20, 20196 yr It depends on what trim level you have. Mine was wired for them, the plugs were just hanging out behind the door panel. Plugged them in, and everything worked right off the bat. Mirrors run off the IOD fuse. That switch looks like it'll work just fine. Another thing. If your new mirrors have heat, you'll have to get a new climate control stack that has the 'Mirror" button in it for heat. That was plug and play for me as well. Edited March 20, 20196 yr by trreed
March 20, 20196 yr Mine was also wired for them. I just plugged them in. I have not installed the climate control with the mirror button so the heated does not work. One day I will.
March 20, 20196 yr Mine was not. I have a 2001 2500 that had manual windows, locks, and mirrors. I have lots of parts from my wrecked 95 3500 and i used the regulators, motors, mirrors, latches and wiring from inside the doors to put power everything in the 2001. I made my own harness that runs along the bottom front edge of the dash. You cant see it at all. If you do that just make sure you run it to where you can drop it to the floor and get the dash out without cutting wires or use connectors you can unplug.
March 22, 20196 yr Gonna be doing the same thing, already wired for it. Plug and play from a free parts truck Hopefully yours is wired as well.
March 22, 20196 yr Mine is wired for it, but I don't have a switch. Where is the factory switch location for the power mirrors? And the defrost? Edited March 22, 20196 yr by kzimmer
March 22, 20196 yr Just now, kzimmer said: Mine is wires for it, but I don't have a switch. Where is the factory switch location for the power mirrors? And the defrost? There should be a small knock out in triangular part of the door panel that covers the mounting bolts. Mounts thru the hole. The defrost switch is in the HVAC control. You can find them on ebay and others or wrecking yards.
March 22, 20196 yr 6 minutes ago, dripley said: There should be a small knock out in triangular part of the door panel that covers the mounting bolts. Mounts thru the hole. The defrost switch is in the HVAC control. You can find them on ebay and others or wrecking yards. Excellent, thank you. This is on my to-do list that's a mile long. Wait... So are the controls for the passenger side mirror located on the door panel right on the passenger side mirror? That seems counter productive, lol. Drivers control on the drivers door makes sense. Since the driver is adjusting. Or are they both controlled from the same switch? I hope so. Edited March 22, 20196 yr by kzimmer Grammar
March 22, 20196 yr 2 minutes ago, kzimmer said: Excellent, thank you. This is on my to-do list that's a mile long. Wait... So is the controls for the passenger side mirror located on the door panel right on the passenger side mirror? That seems counter productive, lol. Drivers control on the drivers door makes sense. Since the driver is adjusting. Or are they both controlled from the same switch? I hope so. Same switch in the drivers door. The knob turn back and forth for left and right.
March 22, 20196 yr 2 minutes ago, dripley said: Same switch in the drivers door. The knob turn back and forth for left and right. Good stuff, this has been bugging me for a while. @portlandareae28 did you find out if you have the harness behind your door panel?
March 22, 20196 yr Author 2 hours ago, kzimmer said: Good stuff, this has been bugging me for a while. @portlandareae28 did you find out if you have the harness behind your door panel? Not yet, this weekend hopefully. Have some honey do’s to complete.
March 22, 20196 yr Here is my wife's analogy. ( wouldn't it be easier to buy a truck that has these options already ) go and try to explain anything after that. I'm still an idiot at the end of day.
March 22, 20196 yr 11 minutes ago, Dieselfuture said: Here is my wife's analogy. ( wouldn't it be easier to buy a truck that has these options already ) go and try to explain anything after that. I'm still an idiot at the end of day. A lot us are riding in the stupid boat.
March 22, 20196 yr 4 minutes ago, dripley said: A lot us are riding in the stupid boat. Thing is it the ego that most can't get pass, and she has a huge one. She does have good qualities too don't get me wrong, it just doesn't shine as often.
Does anyone know if the trucks are pre wired for power mirrors? So I would just need the control and power mirrors to convert the truck?
https://www.ebay.com/itm/DODGE-RAM-1500-2500-3500-DURANGO-TRUCK-POWER-MIRROR-CONTROL-SWITCH-KNOB-BK-94-02/113577448786?hash=item1a71be5552:g:kwQAAOSwoN5cQ7d2
will this one work?