2 fenders, both driver side doors, bed and tailgate back from the paint shop. Got the bed and most of the driver fender done today. Its coming together. Interior is coming next with a rewiring of everything and a dash rebuild.

I have to do this on both mine, over here though a 3500 8ft bed is no smaller than most entire cars, at least my 2500 is 6ft bed so I just might find a paint shop that will do the bed

Going with the late 70s early 80s lettering for the gate

Just make it a power wagon

@Dieselfuture think that's a bit much

1 hour ago, Gregturley said:

@Dieselfuture think that's a bit much

It's hard to imagine someone stumbling across this truck at the dealership and thinking "That's beautiful...I gotta have it".  But then again hallucinogenic drugs were popular then so... 

On 5/1/2020 at 8:58 PM, Gregturley said:

2 fenders, both driver side doors, bed and tailgate back from the paint shop. Got the bed and most of the driver fender done today. Its coming together. Interior is coming next with a rewiring of everything and a dash rebuild.

Blacked out H2's are looking good! 

Edited May 5, 20204 yr by Bullet

6 hours ago, Gregturley said:

@Dieselfuture think that's a bit much

Man you're good at body work  looks like a completely different truck now 

@Dieselfuture spray cans and Sharpies 

@Bullet Thanks H2 wheels were not my first choice but I'm liking them more now that they're on there.

14 minutes ago, Gregturley said:

@Dieselfuture spray cans and Sharpies 

@Bullet Thanks H2 wheels were not my first choice but I'm liking them more now that they're on there.

I think they were a great choice...especially since you blacked em out.  Get some caps on em and they'll look even better. 

@Bullet some people have cut down the factory Dodge centers and made them fit but i don't have any right now.

Just now, Gregturley said:

@Bullet some people have cut down the factory Dodge centers and made them fit but i don't have any right now.

Well with all the other stuff you've been doing lately I'm sure that would be a walk in the park for you.  I'll just wait to see what you end up doing on that... 

Trying to save some money i didn't have the tonneau cover painted with the other parts. After getting the bed on i couldn't stand it so I'm now in the process of sanding it to paint. Painter said $400 if his guys sand and paint, $200 if I sand. Glad i still have my DA.

 Wife said the hood looked out of place with the shiny fenders so next is a light wet sand with 3000 and try my hand at buffing it out.

  I wasn't going to mess with the passenger side doors but....

6 minutes ago, Gregturley said:

Trying to save some money i didn't have the tonneau cover painted with the other parts. After getting the bed on i couldn't stand it so I'm now in the process of sanding it to paint. Painter said $400 if his guys sand and paint, $200 if I sand. Glad i still have my DA.

 Wife said the hood looked out of place with the shiny fenders so next is a light wet sand with 3000 and try my hand at buffing it out.

  I wasn't going to mess with the passenger side doors but....

Looking good...I'm not a painter but I don't mind doing the dirty work to save a few bucks either.

27 minutes ago, Gregturley said:

Wife said the hood looked out of place with the shiny fenders so next is a light wet sand with 3000 and try my hand at buffing it out.

You have a nice wife. I think  the only good comment I ever got from mine was, it's quieter in the cab now since I put fte resonator on. 

This was my temporary fix

That’s a budget paint job-one panel at a time. 

@Dieselfuture I have a great wife.

 Don't have any pics but my rockers are white duct tape. Rear of rockers aren't too bad but the front of both have holes. 

 I did not plan on doing this much paint work. If it was better thought out i should have put rockers on it and then painted the whole truck. I really didn't realize how scratched up the cover was until i went to put it back on. Problem was i had all the body parts piled up on my trailer and every time i needed it i had to move the bed. Just got tired of it.

 Old bed had spray in liner. I forgot how much things slide around on a steel bed so Thursday I'm taking it to get this bed sprayed. 

 Whats depressing is after body parts, paint and bed liner I've spent more than i paid for the truck. At least I've spread out the cost over a year or so.

Yhea I hear you, but still better than having a huge monthly payment. I can see if my truck made me money daily then I'd probably get a new one and trade every so often, but I only use it when I need it and it's more of a hobby to keep me sain in this life. So I guess I'll keep working on it for now and may be some day my kid will figure out that it's something to have and keep it a live. Then again if things keep in same direction, not sure if I'll be around or trucks will be legal, guess we wait and see. All I know is I'm not taking no force anything, live free or die is my way, hope it's same for many others.

1 hour ago, Dieselfuture said:

Yhea I hear you, but still better than having a huge monthly payment. I can see if my truck made me money daily then I'd probably get a new one and trade every so often, but I only use it when I need it and it's more of a hobby to keep me sain in this life. So I guess I'll keep working on it for now and may be some day my kid will figure out that it's something to have and keep it a live. Then again if things keep in same direction, not sure if I'll be around or trucks will be legal, guess we wait and see. All I know is I'm not taking no force anything, live free or die is my way, hope it's same for many others.

My $625  for 6 years back in 01 was ok until sometime in 03 and I got tired of writing the checks. Still took me another 3 years to pay it off. 13 years with no car payment has been very nice.

Edited May 6, 20204 yr by dripley

Winter camo paint job. Have to pull off the handle and sand around that area. 220 almost done next up 400 grit and off to paint shop.

Just clear coat it

That looks huge! Probably looks even bigger when you’re sanding it