Well gang... I finally got bit by the the aluminum rim cracking problem. When in to try and have another set of 235/85 R16 tire put on them and the shop person called me back in the shop and 3 of my rims where cracked. So now I'm shopping for rim and tires again.. I already dropped my rims off with a friend to have them recycled and hopefully he remembers to drop some pics of it on the web...

Expensive scrap!! I hit a hunk of firewood that someone thoughtfully left in the road (car in front swerved at the last second)... I was driving the Cirrus... bent the inside of the rim all to crap! My garage found me a good used rim, had been cleaned... all 4 leak air these days, so I don't know what to say.

What kind you want ?

  flagmanruss said:

Expensive scrap!! I hit a hunk of firewood that someone thoughtfully left in the road (car in front swerved at the last second)... I was driving the Cirrus... bent the inside of the rim all to crap! My garage found me a good used rim, had been cleaned... all 4 leak air these days, so I don't know what to say.

you weren't i Idaho were you?:lmao2:

Where are they cracking? I have not heard of this, is it a casting problem? Might be an opportunity to move up to 17" late model rims and tires. I see factory take off wheel and tire combos on craigslist in Denver fairly regularly for around $1000. Betcha you could find some in Salt Lake or closer if you looked around. Chris

seriously i have never heard of that one. i seemed to have had everything else happen in the past year. i guess it is another one to look foward to. sorry to hear about your misfortune.

Well I got a set of modular aluminum wheels coming and a set of 235/85 R16 (14 ply) tires coming. Oh! Its going to hurt...

I bent the wheel so that it locked up when it hit the strut!

  flagmanruss said:

Expensive scrap!! I hit a hunk of firewood that someone thoughtfully left in the road (car in front swerved at the last second)... I was driving the Cirrus... bent the inside of the rim all to crap! My garage found me a good used rim, had been cleaned... all 4 leak air these days, so I don't know what to say.

i feel your pain. dont happen to have a cheap but great 6 speed door stop laying around do you? love to see those rims though.

Sent a email to my buddy hoping he gets a picture of them before he hauls them for scrap...

What do they look like ? The new ones.

Shoot, I have a set of 16" steel wheels that would bolt right on that I would let you have for $100!! lol I forgot, I also have the chrome dress up rings for them too!

Already got 2 sets of steel wheels now...

Alot of guys around here get them welded...yours to far gone for that?

Too late now there on there way to the recycle center in Payette today... I guess there is no pics either... I was hoping my buddy would got pics of them and posted up...I did want to truck home grab the camera shot a few pics and then truck them back to New Meadows, ID 40 mile round trip for pics... Oh well...

were you having a hard time keeping your tire pressure up or were they cracking from the center?

No leaks... The cracks where on the inside bead where you wouldn't normally see it. But 3 wheels had at least 3-5 cracks a piece in them... But 1 wheel was absolutely fine... Go figure...

What kind of wheels are you replacing them with Mike? I thought the wheel cracking issue was with 17" wheels and only a small handful if that. I hope mine hold up! If you want to sell your single good rim let me know. Chris

  Mopar1973Man said:

No leaks... The cracks where on the inside bead where you wouldn't normally see it. But 3 wheels had at least 3-5 cracks a piece in them... But 1 wheel was absolutely fine... Go figure...

All 4 rims should be down in Payette, ID scrap yard now... As for replacement I ordered a set of 4 aluminum modular rims 16x7 and a set of 235/85 R16 (14 Ply). As for what they exactly look like well you could head over to Big O Tires and look up the modular rims...

Too late I guess but there's a set for sale on CF for $75 for 4 factory aluminum wheels ...wish I was close enough to get them for spares

Sorry for the delay guys.....here are the pics of the cracked wheels.