Marcus2000monster

I dont think I need new tubes. I was referring to o rings for the tubes. My bad...

Whats the best source for some connector tube o rings injector body o rings and copper washers? Ebay? DAP?

Back to topic, what exactly cuases my truck to pull to the left? Tie rod ends wheel bearings? I checked tire pressure and set all 4 to 60psi...

The question was directed at @Sycostang67 but thanks for sharing your experience!

How many miles on your coopers?

This should be put I tontje articles section. Very good reminder mike thank you.

Lol!

I think you got sucked into a trap! Lol

True. I think a 235 is 9 inches across and that’s the tread width of my 285s

Thank you much! Honestly they don’t look as bad as I thought for how skinny they are.

Will do. I am correct about a taller tire lowering rpms right? Mike could you get somep pics of your truck like this? I’m considering going all the way down to 235s these are 275/85s

My bad. Id like to go taller to lower rpm. Does hankook make a 265/85r16

Will more revolutions per mile bring rpms up? I wish I had 3.55s lol cuase I hate how high it revs out! @Mopar1973Man I compared 265/75/16 vs 235/70/16 and it showed the 235 as being like an inch and a half shorter. I thought you sais it was 1mm taller? https://tiresize.com/comparison/

HAHA!! ill def check it out! Same

Thanks for chiming in! Do you have a coupon code or will it display on website?

DDP seems to be a good company. Eventually I would love to get these built to 150s or just get new. Maybe by then ill have a He351 on the Green Been... Mind you I didn't pay the 800$ for a new set of DDPs they were used with 20k miles haha.

How did you build it into the tune? Your saying don't run the switch and the Qaud high idle at the same time? Ill tell you a lil secret. I actually have a set of DDP 75Hp Sac injectors that I took on trade. I was considering running them which is why I asked opinions. But you mention using bigger as to lower duration. I thought about sending the 75s to DAP and having 125hp nozzles installed and pop tested. WHat do you think about that? But then again I may just run the 75s without wiretap until I can cough up the cash to have the nozzles upgraded. Thoughts?

Any reason to go bigger than 75s besides Nicks reasons? Which is why I ordered a High idle switch from you! Lol

I have 16 inch wheels

I think I'm going to try a set of Hankook Dyanpro 265/75/17 tires

Lol so true! You have 75s with your Qaud right? And your getting in excess of 20 mpg? @Me78569 What mgp are you getting? One thing about the smarty is in one mile my mpg already started going up!

You know I always thought that Hankook tires were a joke. Seems they have proven to be a pretty decent tire. A friend of mine just got 60k out of his...

Its a mopar kit. Buy it from dealership or mopardirect.com. Dad got 85k 4 sets in a row on BFG Rugged Trails...

What about 75s? I cant afford much more than so unfortunately. Looking at DAPs website looks like I can get a set of 7x0.009s for the same as the 75s. They are vco style though. Are 125s sufficient? Sorry I'm jumping around. Ill prob leave wiretap off until I get a clutch and some other upgrades...

LOL! What tires have you guys had good success with?