Introductions

Hello to all,Moe.

I found this site in a round a bout way, I saw a post from Michael in cummins forum.... and followed the rabbit trail here.I like what I see so far, I love the lack of advertising. ( I'll probably donate to help keep it that way). I have limited bandwidth here (hughes.net) and loading page after page of flash advertising on other forum sites.. (which takes precious time when I NEED info asap!) I run out of allowable use in short order!anyway a quick look under 'my' hood:I have a pile of first generation Rams, and 1 2000, 3500 24 valve 4X4 6 speed. Bone stock. This particular pickup is what brought me here today: The good ol p…

I found this forum by following a link in Mopar1973mans sig on the RV forum. Looked like a good site, and I know from being a member on CDF back in 2009 ( I think) that he has a lot of knowledge. Used to own a 99 QC dually back then, but my wife got pissed at it so I sold it and got an 05 1500 Hemi truck that got stolen 6 months later. That led to me getting a 2010 1500 Hemi truck. Well we recently got a 29 foot TT and the 1500 just wasn't big enough. A friend of mine traded in his truck on a jeep so I sold my 1500 and bought his truck . I picked it up yesterday. It's a white 06 3500 QC manual trans Big Horn 4x4 and I really like it. So Hello.

Stationed at Kings Bay, G and im a Male i like guns, trucks, cars, Hunting/Fishing, computers, and Anime currently play Battle Field 3 if any others are interested in adding me my nick is zapman2000 any questions MSG me

Hello all, my name is Don and I'm from the breadbasket of the world, the California central valley. I work for a large poultry producer and run a fleet maintenance shop maintaining class 8 trucks and trailers and agricultural equipment. I've been turning wrenches for over 35 years and love it. I have an '01 3500, quad cab, dually, 6 speed all stock. I bought it used about 4 years ago with only 200k on it. It's a little rough around the edges and I have some bugs to work out but nothing major. It gets me 23mpg and it will haul anything I need so I think I'll keep it for a while. I've been reading a lot of these threads trying to figure out my fuel pressure issue. So…

Hello all, I have always wanted a diesel powered pickup and found my 1983 Ford F250 with a 24V Cummins which I recently purchased. Here is a build thread I've started and hope to hear some guidance before I make some mistakes. http://forum.mopar1973man.com/threads/7902-New-Member-New-Ride-83-F250-with-24V-Cummins Thanks to MoparMans articles which have helped me thus far! Here is the truck as of today.

Just thought I would quit lurking and join the Forum. I'm 58, married to to the love of my life now for 35 years. I have a beautiful 21 year old daughter, she is the biggest reason my hair is turning gray and turning loose. I also have a 15 year old son who is keeping me young, best young man ever he is making up for his sister. Interests are shooting, Ham radio, and turning wrenches, and camping. Bought my first diesel about a month ago, a 1999 Dodge Ram 3500 4wd 5.9 Cummins. We try to camp as often as we can and I was killing my K1500 Chevy. So I bought the Dodge for the price and the Cummins engine. So far I love the truck. Plenty of power even when pulling…

Been lurking around here for a few days, and figured I'd join up. Picked up an 02 24v a few weeks ago, and can't wait to start having some fun with it.

Hi, I am inheriting a 92 Cummins W250 sometime this summer. I am a professional mechanical engineer and an automotive hobbyist in my spare time. My first chore (based on discussions with the truck's current owner) will be the Borgeson steering column. This will be my first diesel, so I am looking forward to ROLLING COAL (just kidding!). Cheers.

Hey moparman hello from PA I ordered one of your high idle switches from you about 2 years ago I'm having a problem with it now and winter is on its way its taking my intake temps and ect tems and making them -40 and throwing a check engine liklght I took the loom off to look for open wires but have found nothing I was wondering if there's a way to order another one from you

New member here (also belong to Cummins Forum) and new to Dodge Cummins. Bought a 1999 2500 in May. Been pretty happy with it so far. Been dumping some money into since I got it. New front end parts, new lift pump, and a Quad XZT+ Runs great. Rebuilt engine at 155k currently at 164k.

Hello all, im new to posting on here , trying to get it right. Id like to start by thanking you for the site , it has been a great tool in repairing my 99 24v im actually having some issues at the moment that I truly need some help with. I have a 1690 code ecm disagrees with pcm after changing my ecm ....... before I go into great detail , just wanna make sure I'm posting in the right spot

Hi there I am a newish owner of a 2006 Dodge Ram 3500 diesel and I have been doing a crash course in diesel trucks for the past year. Before this I had no experience with any vehicles whatsover so it has been a very steep learning curve. My truck has a number of problems that I have been slowly troubleshooting and fixing. It has been a frustrating journey but I am determined to understand my beast. I am very uncomfortable asking online questions but I am getting better. Please go easy on me and remember that the only stupid question is the one you don't ask. Lol I have at least one question for you all today and I pray you can help. Thanks Cheri

Faytteville / fort Bragg nc here, on my second cummins and loving it. Currently have an 06 4x4 with thuren front and rear and some minor engine/tranny modifications

Adam from central Ohio, I have a 2001 2500 Quad cab SLT 4x4 Auto:doh:. FASS DDRP (for now), BHAF w homemade heat shield made from left over roof tin:ashamed:. Crankcase breather mod, thanks to Mopar1973Man via Diesel Bombers, BD turbo timer and an RSD 5" Turbo back exhaust w no muffler. Originally bought the truck with an Edge EZ and then upgraded to Comp which is now lying on my workbench due to major fuel issues, I.E. dead VP44.

Hello everyone, My name is Dante and I just registered for the forum. Ive lurked around here enough I figured i better register and say hey. Lots of good info here. Been really using it lately.

I just registered today. I've been on CompD and all the other Dodge/Cummins forums for the last 12 years. I've got 4 2nd gen 12 valves and a 06 that I drag race. I've been doing the quick diesel class since it started in 06. I've enjoyed all the info on 12 valves on this site for quite a while now. I figured it was time to join the party. I'm old but not slow nor scared. LOLJim

Hello everyone Newb here. I have a 2004.5 Ram 2500 w/ Cummins Power.This is the 3rd Cummins Ram I have had the pleasure of owning.I have been a gearhead for a while and live in the Mid-South.

Hey everyone, I've owned my 99 cummins for a little over a year now, its got the adrenaline, 5" straight pipe, i was told injectors, but not sure, was told some tranny work, and again, not sure!! Feels good though....raptor lift pump aem intake also. I'm getting almost no black smoke outta this thing, anybody know why?? Pulls like crazy! Fuel pressure is about 14 at idle, but dives down pretty rapidly the farther you push the pedal... down to about 5.

Hey guys glad to have found this forum! Just bot myself a project and i'm gNa need a little help completing it! Am lookin forward to learning lots from here! Dont have much time for thiS but i'll do all oi can!