2nd Generation Dodge 24 Valve Powertrain

The engine in my truck is surging. Do you guys have any suggestions? Here is a link for more information. Thanks in advance.

I think I have a dumb question but here we go,I bought a 2002 quad cab great condition, got it home and looked at the air cleaner and noticed the guy before didn't put the top of the airbox on right and looks like it sucked in some dirt?Took the intake tube off and noticed some dirt on the turbo fins is there any way to clean it besides sticking a rag in between the blades, like some carb cleaner???????????

I am wondering if there is anybody here with an exhaust brake on a 2nd gen with automatic tranny? Do they work good together? There are transmission controls available that lock the torque convertor while braking but do they only lock up in overdrive and drive, or in gears below that? I've been trying to cut through the clutter on everything that's available but not having much luck. Hopefully someone here can help me out. Also what's the best brand to be looking at? Thanks!

Where do you find these filters? and what are there referance #'s

well this morning my check engine light came on so i cycled the key and came up with the P0122 and P01693 i know the 0122 code has to do with the TPS which would make sense as i was bugging moparman last night trying to trouble shoot my exhaust brake not working and started digging into the APPSi guess i could start by clearing the code and seeing if it comes back..correct? it may have thrown it when i was digging in the apps? or maybe i screwed something upalso.. mopar i forgot to mention maybe like 8 months ago i did have a dead pedal issue but i think it was a bad connection on my edge plug where it ties into the map sensor with the Y.this same time is also when it fir…

I have an 01 qclb ctd 4x4 that needs a pcm and would like to know what years are compatible. Would a 2000 or maybe an 02 work on an 01. It will be flashed to match my vin. Just need to know if it will work....Thanks guys.....

The guy who does the horseback rides from our vineyard has a Dodge 99 3500 dualie. His truck quit running the other day. The dealer said he had a 251 and 253 code. They replaced the VP ($1453), the intank module ($695), labor ($795), and misc. items for a total 0f $2995. He doesn't know anything about his truck. He pulls a 5 horse trailer all the time to our place. We have a very steep hill to get here. Anyways, I was telling him the importance of 14 psi minimum, and an after market fuel pump. He went back to the dealer and they told him that this was a new and improved pump! It only needed to put out 10 psi! They told him everything would be fine with this setup. Now he…

i leaving OK to head home wednesday. while there i am going to install my new ADII 165. it came with a kit to replace the intank lift pump i have grown to love so much. Has any one here replaced an in tank pump? if so is there anything i should watch out for? the instructions look pretty straight forward but you never know. my try getting it running with the tank on the ground and rehang once it is runnig right. any input would be appreciated.

Couple questions about a rear axle swap. I have a line on a 3.54 ratio complete assembly from a '98 2500. My truck ('99 3500 DRW) is fitted with a Dana 80.1) Does a '98 2500 diesel use a Dana 80?2) Are there differences between axles used in SRW and DRW applications?3) Are there any differences between the rear axles on a rear wheel only ABS truck & all wheel ABS truck (mine is the latter)?4) Are U joints the same between the two?5) Any challenges with attaching to the springs?I'm aware of the speedo cal issue. Anything else I'm not considering?Appreciate the help,Joe in St Louis

NO TEMP RISE SEEN FROM INTAKE HEATERS Ok got that part now what I did was eliminate the heater (Ca. warm wheather) to get a little more flow, I left the solenoids hooked up and insulated the heater ends in hope of fooling the computer no luck so wondering what you guys do to keep from thrown this code

Hi Guys, I'm new here real nice site. I came here looking for some info and hopefully some help or direction as i'm really struggling with dead gauges and a no bus odometer on my new to me '01 2500 4x4 5 speed. This truck has been rode hard and put up wet way too many times, but the drive train seems to be in decent shape and it'll work good as my farm truck. What I've done so far is remove and clean the bolted connector several times in the under hood fuse box, I have also removed and cleaned the under dash by the clutch main connector. I have tried to get codes but the only thing retrievable is 900 920 921 when I do a cluster check, all the gauges function when I do…

Whats the TORQUE SPEC for the 10mm sinle bolt that holds the rocker on the cradle???

My truck was in the Diesel Shop... the mechanic questioned "all the extra wiring under the dash".... Yes there was. I'd left the harness on the trailer brake full length as it had nice labels on each lead. I had installed an Escort Radar system (front & rear sensors wired to a under the dash box & a tiny control unit)... again left full length as they were tiny factory made connectors. They were all bundled & zip tied under the dash. None of these affect the engine but he didn't know what it was. I had an AD150 & big line system installed. Now, I'm adding a IAT fooler & XZT+. Both are plug-ins. This is important as they can be rev…

So, I have repaired the front axle ABS sensor/hub/bearing or whatever you wanna call it, and have yet another pending DTC. P0126 -- not one I'm pleaseantly happy to see. I have little money to make it into next week, due to the repair I just made. Why do bad things happen to good people? Is there any way to keep the Injection pump from failing completely. I just need it to last me long enough so I can save up the funds to purchase a new one, seeing as how they aren't cheap. Anyone got an extra pump laying around?

I'm trying to decide between an airdog 150 or the airdogII. I know the 150 will supply more fuel than I'll need, but they are set at 15psi and I would like to be able to adjust it. 15psi is good, but is it best? I would like to see 16 to 18. Any input would be great.

Well, I wound up buying a new VP44. Ouch!! Now I have a whole new problem. Twice it has happened to me and once to my daughter that when the ignition is in the on position no dash lights appear nor does the engine turn over. There is no power at the ignition at all. The batteries are 2 weeks old and are Interstate 1000 CA. Any help would be appreciated as I am leaving on a 3500 km trip this coming Sunday pulling a 32ft trailer!! Help!! Arcwelder --- Update to the previous post... Oops!! Truck is a 01 QC 2wd.

HI, so this is my first time posting on here. I just found it other day. Anyway been having some trouble with my transmission. When it shifts to third gear it revs real high but will eventually shift. Been talking with goerends since I have some of there parts vb/tc. They say my 3rd gear clutches probably went out. Anyone one on here ever rebuild a transmission. Thinking about doing it myself.

I have a 2.5 lift with longer springs.My skyjacker control arms are played out.Who sells good strong arms?

Researching for another project I came across wideband o2's that are also diesel rated. I know some VW's have them for emissions. Other than that any reason to have one in our trucks? Only thing I could see is for tuning, but even then it seems to just be another way to

Ok fellas you know I'm having problems with my tranny that I just bought not too long ago! So I'm thinking since I'm going to be down while waiting on flick to get me another tranny!!! I was wondering what type of clucth to put in! You see all the mods I've done to it, I'm turning over 400hp and the clutch in is kinda weak although it's considered heavy duty! I might as well put in a heavier duty clutch since I'm tore down that far! So give me y'alls expert opionions!!! Thanks in advance!