Posted January 11, 20178 yr Well guys my keeping a eye on the nv5600 didn't work it failed after only 10k, so my question is what are s one of the common mistakes company's make rebuilding these I'm just sorta curious what they could of screwed up
January 11, 20178 yr Author Im pretty sure its a bearing failure its making a squalling noise with excessive grinding in 5th and 6th the the shifter will about vibrate ur arm off, I'm running 7qt oil, it doesn't have coolers, I've only pulled one 6k load and don't put a load on 6th gear if a can't cruise above 1800rpm on flat strait roads I don't use 6th
January 11, 20178 yr What fluid are you running in it? I remember after they discontinued the 5600 there were a lot of cheap parts floating around out there for rebuilds. Probably still are. You might be a victim of that.
January 11, 20178 yr Author I'm running Pennzoil syncromesh, I'm wondering if they could have forgot something in there or set the tolerances wrong
January 11, 20178 yr Did you check the fluid to see if there's suspended metallic material? Take it for a short drive and then dump a little fluid in a cup and see what it looks like.
January 11, 20178 yr I have a buddy that is working with a shop in Texas that is extremely good with these. I can get the name/price if you are interested.
January 11, 20178 yr Author I'm planning on building it my self I was just C ourious if there was a common thing that builders were failing to do
January 11, 20178 yr I would be interested to know the availability of NV5600 parts. I have heard that they are scarce/expensive. I wonder if it would be cheaper to source a rebuilt G56 rather than try to rebuild your 5600?
January 11, 20178 yr Author 5600 parts are very hard to get if u want oem as for me I'm hoping it'll only be bearings but well see
January 11, 20178 yr 3 hours ago, stevens cummins said: I'm planning on building it my self I was just C ourious if there was a common thing that builders were failing to do Understood. If you are on fb look up Cody Albrecht and pick his brain.
January 17, 20178 yr Author Well i pulled the shift tower today with the few min I had and well that didn't show much I could see the oil and it looks to maby have some metallic in it but won't be sure till I drain it
Well guys my keeping a eye on the nv5600 didn't work it failed after only 10k, so my question is what are s one of the common mistakes company's make rebuilding these I'm just sorta curious what they could of screwed up