I am attempting to track down a driveline vibration. Seems to be happening when accelerating from a stop while turning left. Unknown history of diff and drive line maintenance. I Changed the diff oil in July. Not many miles use since June. Will take a diff oil sample soon for analysis.
This weekend I drove at hiway speeds for about an hour. No issues. Got home and immediately used a laser thermometer to check u-joint and diff housing temps. Ujoints all seemed fine and no hot bearings. Rear Diff housing pumpkin measured about 100F. Housing near pinion recorded about 120F. Is there something maybe going on with a pinion bearing? Any idea on normal housing temps after a good drive? Looking for any clues as to where to look from here. Thx.
I was going to say the same thing, if he has limited slip it may be clutch chatter his hearing, these take limited slip additive. Or possibly something is coming undone in the rear end.
I am attempting to track down a driveline vibration. Seems to be happening when accelerating from a stop while turning left. Unknown history of diff and drive line maintenance. I Changed the diff oil in July. Not many miles use since June. Will take a diff oil sample soon for analysis.
This weekend I drove at hiway speeds for about an hour. No issues. Got home and immediately used a laser thermometer to check u-joint and diff housing temps. Ujoints all seemed fine and no hot bearings. Rear Diff housing pumpkin measured about 100F. Housing near pinion recorded about 120F. Is there something maybe going on with a pinion bearing? Any idea on normal housing temps after a good drive? Looking for any clues as to where to look from here. Thx.