My limited slip chatters a little bit in the turns. How much additive do I add? I changed the gear oil about 10K miles ago with Dino gear oil that had some friction modifier for limited slip. Chatter just started. Should I go 4 oz. and add more if needed?

 

Thanks

 

 

32 minutes ago, JAG1 said:

Should I go 4 oz. and add more if needed?

Yes, a 4oz bottle should do it.

Thanks IBMobile, 

4 hours ago, Dieselfuture said:

Don't get your hopes up around here DiselFuture. We just 'Restful Ranch' at the end of the trail.

 

Edited March 21, 20214 yr by JAG1

As an alternative to the dealer, I use Sta-Lube EQUA-TORQUE differential friction modifier made by CRC.  It meets GM#1052358, Ford #M2C118-A and Chrysler #4318060.  It comes in a 4 oz tube and is enough for most diffs.

2 hours ago, JAG1 said:

Don't get your hopes up around here DiselFuture. We just 'Restful Ranch' at the end of the trail.

 

What,... I just wanted some popcorn, that's all

15 minutes ago, Dieselfuture said:

What,... I just wanted some popcorn, that's all

Next comes the beer, next the chit chat and a full blown party, then more show up from all over. Nothin' ever gets done. 

51 minutes ago, JAG1 said:

Next comes the beer, next the chit chat and a full blown party, then more show up from all over. Nothin' ever gets done. 

Dont stop I am half way there. 

Give me a bit of time ill most likely show up in my 2006 Dodge. Then we will party maybe a bit of street racing. It's all good... 

2 hours ago, Mopar1973Man said:

Then we will party maybe a bit of street racing. It's all good... 

 

I've seen @JAG1party.  By 9PM you can stick a fork in him; his done.